Hello! Do you have in stock or on order?

Strength training rack designed for easy placement
and use of recovery and rehabilitation simulators
medical purpose. - length no more than 1650 mm; - no more than a width
850 mm; - height no more than 1810 mm. The rack should be in the form of a metal
prefabricated welded structure made of carbon steel sheet and steel
profile pipe. The metal surfaces of the racks must be
covered acrylic paint, giving mechanically strong, chemically and
moisture resistant coating. The tabletop must be made in the form
varnished plywood with a minimum thickness of 16 mm. Additional
accessories 1. wrist power wheel Must be applied for
active restoration of mobility of the wrist joint, as well as
to prevent complications associated with long-term


display. Stable fastening. Compactness. Anatomically correct

viewing. Equipped with digital counter. 2. power wheel for shoulder
Should be used for active recovery of muscle groups
shoulder joint, as well as to prevent complications associated with
prolonged immobilization (immobility). Adjustable level

easy to read display. Height-adjustable location on
rack. Stable fastening. Compactness. Anatomically

SPM, view. 3. hand trainer The trainer should be used for
development of joints and muscle groups of the elbow and shoulder joint, and
also to prevent complications associated with long-term
immobilization (immobility). Adjustable resistance level
– at least 5 load levels. Information easy to read
display. Compactness Anatomically correct movements. Digital
counter - count/step, time, calories, SPM, view. mount on
suction cups to any smooth surface. Wide range of motion
shoulder joint. The ability to adjust the length of the handle of the device. 4.
portable multifunctional strengthening mini bike
lower and upper limbs Designed for the development of limbs,
both upper and lower. Adjustable resistance level
less than 5 load levels. Information easy-to-read display.
Stable fastening. Compactness. Anatomically correct
movement. Digital counter - count/step, time, calories, SPM,
viewing. 5. upper limb trainer
increase the range of motion of the shoulder joints and strengthen
muscle group of the upper limbs. Adjustable level
resistance - at least 5 load levels. Informational
easy to read display. Easily adjustable in height
on the rack. Stable fastening. Compactness. Anatomically
correct movements. Digital counter - count/step, time, calories,
SPM, view. 6. Adjustable Finger Ladder Exerciser for
developing upper shoulder girdle, wrist, and fingers cysts.
Adjustable height for everyone. Easily adjustable in height
shelving arrangements. Stable fastening. Compactness.
Anatomically correct movements. Applied to a position, sitting, or
standing. It is used for the rehabilitation of the shoulder, elbow, hand, fingers.
Adjustable distance: there are at least 25 steps of at least 32mm
intervals, and at least 50 steps from at least 16 mm intervals. All
simulators must have the function: count / step 0 ~ 9999. time
0:00~99:59 Minutes: Seconds. cal (calories) 0~9999 cal. SPM: 1~999
counts per minute. View: Changeable every 6 seconds display
the above functions, and its return to the display of various
functions. Scope of delivery: Metal rack with holes for
fastening racks for simulators - 1 pc; Plywood tabletop - 1pc;
Racks for mounting simulators on a rack - 4 pcs; Parallel
rack mounting plates 8 pcs; Strength training equipment - 6 pcs; Anchor
bolts - at least 4 pcs. Warranty service maintenance MT not less
37 months.

Sincerely, StalEnergoMash LLC
Supply Department Vladimir
honeycomb

Year of foundation: 1931

Industry: medical industry

Manufactured products: medical instruments, equipment, technique

Revenue: RUB 518,605 thousand (2018)*

Net profit: RUB 45,344 thousand (2018)*

CEO: Shakirov Nur Khamzinovich

Number of employees: 216 (2018)*

JSC "Kazan Medical Instrument Plant" is one of the largest medical and instrumental enterprises in Russia.

It produces about three thousand items of medical instruments, and in terms of precision mechanics, it produces more than 90% of profile products in the country. The main end consumers of PJSC "KMIZ" products are medical institutions financed from the budget.

The factory of dental burrs was founded on charitable funds in Kiev in 1931. In July 1941, in connection with the beginning of the Great Patriotic War the factory was evacuated to Kazan. In 1963-76. the construction of the main production buildings the first and second stages of the Kazan medical instrumental plant.

Main products

diamond heads; carbide burs; dental handpieces and micromotors; carbide cutters; endodontic instruments, surgical needles; needles and instruments for reflexology.

KEY SHAREHOLDERS**

as of 01.10.2019

48,5% - Polymer Products LLC
34,62% - KMIZ export LLC
10,26% - Shakirov Maxim Nurovich
3,33% - Shakirov Nur Khamzinovich

MANAGEMENT

* Rosstat data
** company data