The product range of products manufactured by the company "GILEX" includes several models of well pumps with different technical characteristics. This equipment is intended for use as part of domestic and industrial water supply systems with water intake from wells and boreholes. According to users, well pumps from JILEX LLC are among the best on the Russian market.

Rules for choosing pumping equipment

The efficiency of an autonomous water supply system with forced water supply depends on the compliance of the technical characteristics of the pumping unit used with the conditions of water use. To do this, it is necessary to conduct a thorough analysis of all the nuances of the upcoming operation before ordering the equipment. If you are faced with the question of which well pump is best to choose, consider the following criteria:

• well flow rate and volume of water consumption, maximum number of starts per hour;
• temperature of the pumped liquid;
• parameters of the existing electrical network;
• water quality, presence and size of mechanical impurities;
• possible immersion depth for a submersible type unit.

One of the most popular borehole pumps from the GILEX company is the VODOMET centrifugal submersible unit. This equipment Available in several modifications, which allows you to choose a device with optimal technical characteristics for specific conditions of use. Each model is highly reliable, unpretentious, economical, and has high efficiency. When choosing, use the online consultation of our company’s specialists. Communication channels are listed in the “Contacts” section.

• JAMBO electric pumps are surface pumps with a built-in ejector, combining the advantages of centrifugal pumps with the practicality of self-priming pumps. Built-in internal ejector with Venturi tube system provides good conditions suction at the inlet of the pump and allows you to create high pressure at the outlet. They allow you to pump water with lower requirements for purity and the presence of dissolved gases than conventional centrifugal pumps.

• The case is made of stainless steel. The impeller and flow block "guide vane - Venturi tube - nozzle" are made of wear-resistant plastic materials. The adapter flange is made of aluminum, but on the pump side it is separated from contact with water by a plastic back cover.

• To prevent external leaks from the pump part, graphite-ceramic mechanical seals are used. Thanks to the self-lubricating property due to the combination of hydrodynamic and capillary sealing effects, the pumps are practically eternal. The electric motor is an asynchronous squirrel-cage motor, consisting of a stator, bearing shields, a squirrel-cage rotor and a terminal box in which there is a capacitor and terminal blocks for connecting the output ends of the electric motor with the supply cable.

• The stator of the electric motor is protected by a thermal protector, which turns off the electric motor when the winding overheats, and is cooled by a fan located at the rear end of the rotor. The automatic water-lifting installation is designed for uninterrupted water supply in automatic mode to cottages, dachas, farms and other consumers. At the same time, the device automatically maintains the required pressure in the water supply system, turning on and off independently as consumers consume water. Automatic pumps are distinguished by the principle of control: pressure and flow.

An automatic pump with an automatic flow control system (“JAMBO 60/35 N-K”, “JAMBO 60/35 P-K”) consists of a surface pump and an automation unit (automatic device) that controls the presence of flow and its magnitude (protection from "dry running"). The automation unit also reacts to the lower threshold of water pressure in the system.

Technical characteristics of GILEX JUMBO 60/35N-K

Information about technical characteristics, scope of delivery and appearance, may differ from that indicated on the website. Please check this information with the manager when submitting your application.

JUMBO 60/35 N- centrifugal pump, surface pump, intended for organizing water supply in residential buildings, can be used for irrigation systems. The body of this pump is made of stainless steel, which makes the device highly reliable and allows it to be used not only for pumping water, but also for other purposes, for example, in fountain installations.

Features of pumping equipment of the JAMBO N series:

• Surface electric pump, type: centrifugal, self-priming;
• The pump is designed to pump clean water;
• Purpose: water supply at home or for an irrigation system;
• The maximum depth from which water can rise is 9 meters;
• Built-in injector;
• There are no special requirements for the purity of the liquid, as well as for gases dissolved in water;
• The pump body is made of stainless steel;
• Graphite-ceramic mechanical seals protect the pump from leaks;
• Reliable protection against overheating - the electric motor is cooled by a built-in fan, the electric motor starter is protected by a thermal protector;
• Low noise level.

The pumps of the presented series are used to lift water from wells, wells or other sources of clean water, but unlike submersible pumps they can be installed at a distance from the source, for example, in the house. At the same time, you should not be afraid of noise - pumping equipment Jumbo It operates with a low noise level, is also small in size, and can be installed even in a small room.

A special feature of the presented model is the built-in injector, thanks to which it is possible to achieve high outlet pressure with low suction power. The pump in this series is designed for pumping clean water; all its parts in contact with water are made of materials suitable for contact with food. At the same time, it will not be a big problem for the pump if the water contains gases and solid impurities.

Gilex 4012– an automatic surface pump with a built-in pressure hydraulic tank, which has an automatic control system capable of independently maintaining a given pressure in the system. Herself pumping station has a built-in ejector, pressure control relay and pressure gauge. Performs the function of collecting liquid from various sources and its subsequent supply to the irrigation system or water pressure system of a country house, cottage, or summer cottage. The body of Gilex 4012 is made of cast iron, the impeller together with the flow block is made of wear-resistant plastic materials, which increases the strength and reliability of operation, as well as extends the service life of the product.

Device

The design of Gilex 4012 uses an asynchronous 600-watt electric motor, capable of achieving a maximum performance of 60 liters of water per minute and raising water to a height of 35 meters. The built-in ejector is capable of providing ideal suction of liquid at the inlet and creating increased pressure at the outlet. It also increases the water suction depth to 9 m. An uninterrupted and continuous flow of liquid supply to the pump is ensured thanks to automatic system power supply capable of turning the pump on and off to maintain the set pressure in the water supply system. The electric pump motor is protected from overheating thanks to a built-in fan and a thermal protector that can automatically turn off the pump if the maximum permissible temperature of the device windings is reached. A stable mount on the unit body allows you to securely fasten it for work.

Peculiarities

Automatic operation, presence of thermal protector, uninterrupted fluid supply, overheating protection, built-in ejector, fastening stability, anti-corrosion protection.