Bunny made of polymer clay. Materials and tools

• soft blue, pink, black and white;
• A bear-shaped cutter no larger than 3 cm in size;
• Acrylic rolling pin and pasta machine;
• Needle or toothpick;
• Thin blade;
• Small scissors;
• Modeling stack;
• Metal blank for a brooch;
• Hot glue and gun.

Master class on sculpting a plastic bunny

2. Using a modeling stack (one with a flexible spatula), smooth out all the obtuse corners of the figure so that they become rounded and smooth. Smooth out the ears of the bear cub, and if you can’t make a perfectly straight head, cut off the ears and round the cut points with a stack.

3. Form a 3 cm long figure in the shape of a spindle from mint-colored plastic. Using a blade, cut the spindle into exactly two halves.

4. Attach the ears to the head polymer clay hare and smooth the joints with modeling stack.

5. Using the point of a needle or toothpick, you need to loosen the entire surface of the hare’s body. Make sure there are no missing areas or deep holes in the surface of the clay.

6. From bright pink polymer clay, form a ball with a diameter of 0.5 cm and press it with your finger onto the work surface so that it becomes flat. Place a flat pancake on the hare's tummy. Use a needle to loosen the top layer pink clay, creating the effect of a plush surface.

7. From gray polymer clay (a ready-made shade or by mixing white and black shades of clay) we form an oval 6 mm long, flatten it with our fingers so that it becomes flat and with small scissors we cut out triangular parts exactly in the middle of the oval on both sides so that it turns out Infinity sign.

8. Place it on the face polymer clay hare an element made of gray clay and, with the tip of a needle, loosen the surface of the gray plastic.

9. Form a tiny drop from pink polymer clay and place it in a hollow made of gray clay.

10. Make indentations for the eye sockets above the gray part of the muzzle. Form small balls from black polymer clay and place them in the eye sockets.

11. Make a hole for the mouth in the lower hollow using gray clay. Roll out a very thin strip of black plastic and form thin eyebrows above the eyes.

12. From pink polymer clay, previously rolled out on the minimum thickness of a pasta machine, cut out a small rectangle and use a blade to cut out unnecessary parts and give the shape of a bow.

13. Using a cutter or blade, round off the sharp edges of the bow.

14. Using the edge of a needle or toothpick, make longitudinal grooves on the surface of the bow.

15. Attach a bow to any bunny ear. Place the workpiece in the oven for firing, according to all the recommendations specified in the plastic instructions.

16. After firing, glue the metal surface of the brooch base to the back of the plastic blank with hot glue. Can be glued with regular quick-drying glue. I do not recommend covering the loosened surface with varnish - the plush effect will be lost.

This is the original handmade gift for a child.

If you want to make a homemade gift for a slightly older child, read the master class.

Attach a brooch to your baby's scarf or hat, and you will see how a sincere smile spreads across the cute child's face! Believe me DIY gifts for children They give joy not only to the kids, but also to you)!

Polymer clay pink, light pink or white, yellow, red
- Eyes printed on paper
- Metal stacks for shaping clay
- Knife
- Modeling board

Step-by-step modeling master class:

1. Knead a piece of pink clay, roll it into a ball and shape it into a muzzle.
2. Now mold the nose, tongue and two balls of the bunny’s face.
3. Glue all this to the head of the future hare.
4. Now make two ears from pink and red clay.
5. Make a body from pink clay.
6. You need to stick a white tummy on the body.
7. Next, form the two upper legs and tail of the bunny from pink clay.
8. You need to make a fluffy collar from white clay, and part of the lower paws from pink clay.
8. Now sculpt the feet using yellow, pink and red clay.
9. We begin assembling the hare. glue parts of the lower legs to the body.

10-13. Then attach the upper legs, after them the white collar, give it a shape.
14-15. Now we attach the lower limbs, after them we glue the head.
16. Attach ears to the head and decorate the bunny with dark pink clay circles. Also don't forget to glue the eyes.

If necessary, bake the figurine, and at the end glue the eyes with glue. source

Increasingly, modern girls, instead of expensive and elaborate jewelry from precious metals prefer to wear jewelry made from such a seemingly unattractive material as polymer clay. What is the secret of plastic surgery? In fact, everything is very simple, this material is easy to use, there is great amount shades of this material, and the main thing is that, wearing such jewelry, the girl will always look original and unique.

Today we will try to make bunny earrings. For this we need:
1. Blue Sonnet polymer clay (you can use any plastic you have, but I personally like this company);
1. Sonnet polymer clay, white;
2. Sonnet purple polymer clay;
3. Stationery knife;
4. Acrylic paints white, black and yellow;
5. Sketch of future earrings;
6. Accessories for earrings.

Now you can start creating. To begin, we cut off a piece of blue plastic (this will be our base for the earrings) and knead it in our hands for a long time until it becomes soft and pliable.

Then the plastic needs to be rolled out into a not very thick layer. To roll out polymer clay, you can use a special silicone roller, or you can use improvised means (personally, I use a bottle of hairspray). This does not affect the quality of the product, and helps beginner craftswomen save a penny.

Now we attach the hare blank we have to the resulting pancake (you can make it yourself or use the blank presented below) and carefully cut it out with a stationery knife.

Then we remove the blank and see that no matter how hard we try, our hare still looks more like an incomprehensible blot with uneven edges.

Therefore, we carefully smooth the edges of the base and give it its final shape.

After this, take white clay, knead it in your hands and roll two small identical balls - these are the eyes of our hare.

Take some black clay, roll out very small balls and make the pupils of the hare.

And finally, don’t forget to attach the hare’s nose. The same actions must be carried out with the second earring.
The product is almost ready. All that remains is to bake it and paint it with paints. Place the earrings in the oven for 30 minutes at 130 degrees (the temperature and firing time can be adjusted depending on the type of plastic, but usually the baking rules are indicated on the polymer clay packaging). If you want everything to work out, do not under any circumstances try to bake clay in microwave oven. After half an hour, take out the earrings and wait until they cool down. Be careful while the clay is still warm, as it can easily become deformed.
Cooled earrings need to be painted. To do this, take a thin brush and draw flowers. First we draw the flowers with white paint. Then we make a yellow center, and at the end we outline the flower with a black outline. Let the paints dry.

• Bunny 🐇 POLYMER CLAY 💗 MASTER...

  In this master class I will show you how to make a bunny from polymer clay. A small, funny figurine of a bunny...... From the author Irina Ivanitsk.... Added 4th year. back.

• Master class: Poly mug decor...

  The video was prepared by Sasha S. Vihareva in collaboration with FIMO TV. In this master class, the author will show how to create...... From the author of FIMO TV. Year 3 added. back.

• POLYMER CLAY BUNNY...

  In this video you will see how to make a bunny from polymer clay. Polymer clay is a magical material...... From the author Olesya_ Ly. Added 2nd year. back.

• Master class: Bunny ballerina made of...

  The video was prepared by Sasha S. Vihareva in collaboration with FIMO TV. In this master class, the author will show how to create a delicate... From the author of FIMO TV. Added 1 year. back.

• Polymer clay. Clay rabbit with...

  Create a world with your own hands! In order to make a rabbit from polymer clay with your own hands, you will need...... From the author of Handmade Products.... Added 3 years. back.

• Plasticine bunny!!!❤️❤️❤️...

  Hi all!! My name is Polina and today I would like to show you how I make a bunny or rabbit from plastic...... From the author PolinaU-se Ye.... Added 1 year. back.

• In this master class I will show you how to decorate a mug with a “Bunny” made of polymer clay. * Bunny made of polymer clay....... From the author Alina Virgo. Added 7 months. back.

• How to make a toy "Bunny...

  Master class on modeling from polymer clay / mastic / plasticine In this Master class you will learn how easy...... From the author Marina Kh.... Added 4th year. back.

• Master class: Bookmark &...

  The video was prepared by Sasha S. Vihareva in collaboration with FIMO TV. In this master class, the author will show how to create a mila...... From the author of FIMO TV. Added 2nd year. back.

• Bunny made of polymer clay master...

  In this video I will show you how to make a hare's face from polymer clay. link to dodsy: link...... From the author of Both Two. Year 3 added. back.

• DIY polymer clay bunny...

  Hello everyone! I hope that you understand how to make this cute bunny (or rabbit) Bye everyone...... From the author an interesting life.... Added 5 months. back.

• 🐇The smallest Rabbit in the World has its own...

  The world's smallest rabbit! This is the most beautiful miniature rabbit or bunny, whichever you like best!...... From the author Yulia Nazarova.... Added 11 months. back.

• Bunny made of polymer clay (doll...

  In this video I show how I made a hare from polymer clay. For this I needed food foil...... From the author of life is art i.... Added 2 years. back.

• ABOUT Sculpting BRIEFLY or HOW TO START Sculpting...

  the main clay mixer of Siberia teaches how to mix clay VK - DNT - ... From the author HW. Added 5 months. back.

• bunny tutorial out off polymer clay...

  Easy way how to make the bunny out of polymer clay. Please write to us, what else you want watch on channel. Send us your comments and suggestions wil... From the author of Easy Clay. Year 3 added. back.

• Easter bunny master class...

  In this video we are making an Easter Bunny with holiday eggs in his hands. ...... From the author Both Two. Added 2nd year. back.

• BUNNY WITH CARROTS❀ POLYMER CLAY...

  Welcome! Subscribe to my channel: ✿ English sub! ✿ In this video... From the author Anna Oskina.... Added 4th year. back.

• Master class: Decor of a polymer mug...

  Decor of a mug with polymer clay. In this master class, I will show you how to decorate a mug with “Bunny Mi” from polyme...... From the author Alina Virgo. Added 2nd year. back.

• Polymer Clay Hare Pendant Xy...

  Today I have prepared for you a Master Class on how to make a rabbit from polymer clay. How to make a hedgehog:...... From the author Saparova_art. Year 4 added. back.

Polymer clay pink, light pink or white, yellow, red
- Eyes printed on paper
- Metal stacks for shaping clay
- Knife
- Modeling board

Step-by-step modeling master class:

1. Knead a piece of pink clay, roll it into a ball and shape it into a muzzle.
2. Now mold the nose, tongue and two balls of the bunny’s face.
3. Glue all this to the head of the future hare.
4. Now make two ears from pink and red clay.
5. Make a body from pink clay.
6. You need to stick a white tummy on the body.
7. Next, form the two upper legs and tail of the bunny from pink clay.
8. You need to make a fluffy collar from white clay, and part of the lower paws from pink clay.
8. Now sculpt the feet using yellow, pink and red clay.
9. We begin assembling the hare. glue parts of the lower legs to the body.

10-13. Then attach the upper legs, after them the white collar, give it a shape.
14-15. Now we attach the lower limbs, after them we glue the head.
16. Attach ears to the head and decorate the bunny with dark pink clay circles. Also don't forget to glue the eyes.

If necessary, bake the figurine, and at the end glue the eyes with glue. source