New infrared heaters Ballu BIH-AP2- These are compact, modern, economical heating devices for directional heating. Qualitatively new approach creating comfortable conditions is possible thanks to the use of Ballu infrared heaters. They have become extremely popular in last years, due to their high energy efficiency, safety and unique advantages over other types of heaters.

All BIH-AP2 models come with universal brackets, which allows for easy and quick installation of heaters to the ceiling, wall, cable or even threaded studs! Durable radiant panels with 25 micron anodization ensure high efficiency throughout the entire life of the device. The modernized shape of the case visually reduces the depth of the device (only the front panel is visible).

Operating principle of infrared heaters

Like the sun, infrared heaters emit thermal energy in the infrared spectrum. Heat is practically not absorbed by the air and reaches heated surfaces without loss, which, in turn, heat the air. This creates a soft microclimate in the room and contributes to more economical energy consumption.

For example, if it is necessary to maintain a temperature of 21°C in the room, the IR heater will quickly heat the floor surface to this temperature and the person will already be comfortable, while a standard heater will maintain the set temperature in the area of ​​the person’s head, while in the area of ​​the feet the temperature will be about 15° C, accordingly, a person will feel that he is cold and will increase the temperature until his feet feel comfortable.

Due to this, Ballu BIH-AP2-2.0 allows you to keep the room temperature 3-4°C lower than a conventional heating source, which leads to significant energy savings. At the same time, a person will feel more comfortable than with a traditional heater due to the effective distribution of heat.

Purpose and scope of application

Infrared heaters Ballu BIH-AP2-2.0 designed for primary and additional heating of premises. IR heaters are indispensable for local heating of work areas in rooms with high ceilings or poor thermal insulation, where the use of traditional heating methods is ineffective. The possibility of local installation above the place where people are located ensures economical energy consumption.

Infrared heaters can also be used to clear surfaces of ice and snow and maintain them in this condition, heating and drying materials. Ballu electric infrared heaters are used in offices, retail, public premises, cottages, cafes, bars, restaurants, hotels, etc.

Features of the infrared heater Ballu BIH-AP2-2.0

• The shape of the case is protected by patents Russian Federation
• Possibility of local application
• High energy efficiency
• Does not burn oxygen and does not create a burning smell
• Ceiling installation keeps work area clear
• Universal brackets included
• Possibility of connection to a thermostat
• Side plates made of brushed stainless steel

Video review of infrared heater Ballu BIH-AP2-2.0

New infrared heaters BALLU BIH-AP2 are the most compact modern economical heating devices for directional heating. They are indispensable for local heating of work areas in rooms with high ceilings or poor thermal insulation, where the use of traditional heating methods is ineffective. The possibility of local installation above the place where people are located ensures economical energy consumption.

All BIH-AP2 models come with universal brackets, which allows for easy and quick installation of heaters to the ceiling, wall, on a cable or even on threaded studs.

A qualitatively new approach to creating comfortable conditions is possible thanks to the use of BALLU infrared heaters. They have become extremely popular in recent years due to their high energy efficiency, safety and unique advantages over other types of heaters.

Like the sun, they emit thermal energy in the infrared spectrum. Heat is practically not absorbed by the air and reaches heated surfaces without loss, which, in turn, heat the air. This creates a soft microclimate in the room and contributes to more economical energy consumption.

For example:

If it is necessary to maintain 21°C in the room, the IR heater will quickly heat the floor surface to this temperature and the person will already be comfortable, while a standard heater will maintain the set temperature in the area of ​​the person’s head, while in the area of ​​the feet the temperature will be about 15°C, Accordingly, the person will feel that he is cold and will increase the temperature until his feet feel comfortable. Due to this, the IR heater allows you to keep the room temperature 3-4°C lower than a conventional heating source, which leads to significant energy savings.

Purpose

Main: main and additional heating of premises, local heating of working areas in premises.
Additional: cleaning surfaces from ice and snow and maintaining them in this condition, heating and drying materials.

Scope of application

Office, retail, public premises, cottages, cafes, bars, restaurants, hotels.

Distinctive features

• The shape of the case is protected by patents of the Russian Federation;
• Possibility of local application;
• High energy efficiency;
• Does not burn oxygen and does not create a burning smell;
• Installation on the ceiling keeps the work area free;
• Durable radiant panels with 25 micron anodization ensure high efficiency throughout the entire life of the device;
• Universal brackets included;
• The most compact panel IR heaters
• Possibility of connection to a thermostat;
• Side plates made of brushed stainless steel
• The modernized shape of the case visually reduces the depth of the device (only the front panel is visible)
• 3 year warranty.

• Description
• Characteristics
• Reviews 0

Main advantages:

Equipment:

Heater Bih-AP2-2.0;

Universal brackets;

infrared heater Ballu BIH-AP 3.0.

Description

Infrared heater Ballu BIH AP2 2.0

Heater Ballu Bih AP2 2.0 is an infrared heating device specially designed for fast, targeted heating. It is especially effective in rooms with poor thermal insulation and high ceilings. The heating principle used ensures uniform distribution of warm air masses.

The Bih AP2 2.0 heater can be used to solve the following problems:

Creation of main, local or zonal heating;

Warming up and drying building materials;

Cleaning icy surfaces.

This model, in addition to production premises, can be used in hotels, hotels, office and commercial buildings.

Heater Bih AP2 2.0 - main advantages

The heater has a patented body shape, reliably protected from mechanical stress and destruction from corrosion. Installing an infrared heating device under the ceiling allows you to avoid clutter workplace. Thanks to the improved shape of the heater body, only its front panel is visually visible.

Main advantages:

Wide range of mounting options - on brackets or threaded rods;

Cost-effectiveness combined with high power;

Does not dry out the air in the room;

No foreign odors or noise during operation;

Ultra-compact heating device.

You can connect a thermostat to the Ballu Bih AP2 infrared heater. The kit contains all the necessary parts for mounting to the ceiling.

Equipment:

Heater Bih-AP2-2.0;

Universal brackets;

This model doesn't fit? We recommend paying attention to its analogue - infrared heater Ballu BIH-AP 3.0.

Bih AP2 2.0 Ballu is a new generation infrared heater, which you can buy at an affordable price in the Bigham store. If necessary, it will be delivered to you by courier.

New infrared heaters BALLU BIH-AP2-0.6 are the most compact modern economical heating devices for directional heating. They are indispensable for local heating of work areas in rooms with high ceilings or poor thermal insulation, where the use of traditional heating methods is ineffective. The possibility of local installation above the place where people are located ensures economical energy consumption. All BIH-AP2 models come with universal brackets, which allows for easy and quick installation of heaters to the ceiling, wall, cable or even threaded studs!

A qualitatively new approach to creating comfortable conditions is possible thanks to the use of BALLU infrared heaters. They have become extremely popular in recent years due to their high energy efficiency, safety and unique advantages over other types of heaters.

Like the sun, they emit thermal energy in the infrared spectrum. Heat is practically not absorbed by the air and reaches heated surfaces without loss, which, in turn, heat the air. This creates a soft microclimate in the room and contributes to more economical energy consumption.

For example:

If it is necessary to maintain 21°C in the room, the IR heater will quickly heat the floor surface to this temperature and the person will already be comfortable, while a standard heater will maintain the set temperature in the area of ​​the person’s head, while in the area of ​​the feet the temperature will be about 15°C, Accordingly, the person will feel that he is cold and will increase the temperature until his feet feel comfortable. Due to this, the IR heater allows you to keep the room temperature 3-4°C lower than a conventional heating source, which leads to significant energy savings.

Purpose

Main: main and additional heating of premises, local heating of working areas in premises.
Additional: cleaning surfaces from ice and snow and maintaining them in this condition, heating and drying materials.

Scope of application

Office, retail, public premises, cottages, cafes, bars, restaurants, hotels.

Distinctive features

• The shape of the case is protected by patents of the Russian Federation;
• Possibility of local application;
• High energy efficiency;
• Does not burn oxygen and does not create a burning smell;
• Installation on the ceiling keeps the work area free;
• Durable radiant panels with 25 micron anodization ensure high efficiency throughout the entire life of the device;
• Universal brackets included!;
• The most compact IR panel heaters!
• Possibility of connection to a thermostat;
• Side plates made of brushed stainless steel
• The modernized shape of the case visually reduces the depth of the device (only the front panel is visible)
• 3 year warranty.

Description

Infrared heaters, like the sun, emit thermal energy in the infrared spectrum. Heat reaches heated surfaces (floors, walls, furniture) almost without loss, which already heat the air. This creates a soft, comfortable microclimate in the room with a minimal temperature difference across heights. In addition, when you are in a heating zone, infrared heat is absorbed by the surface of the body and clothing, which creates a feeling of comfort even at low temperatures, and the warmth is felt even in drafts and wind. Infrared heaters are indispensable for local heating in rooms with high ceilings or poor thermal insulation, where the use of conventional heating methods is ineffective.

A qualitatively new approach to creating comfortable conditions is possible thanks to the use of BALLU infrared heaters. They have become extremely popular in recent years due to their high energy efficiency, safety and unique advantages over other types of heaters.

Purpose

Basic: main and additional heating of premises, local heating of residential and work areas in premises.
Additional: heating and drying of surfaces and materials; cleaning surfaces from ice and snow and maintaining them in this condition.

Scope of application

The devices are optimally suited for heating office, retail, public premises, as well as apartments, cottages, interior spaces cafes, bars, restaurants, hotels, waiting areas of airports and train stations.

Technical characteristics of BALLU BIH-AP4-2.0

Information about technical specifications, included in delivery and appearance, may differ from that indicated on the website. Please check this information with the manager when submitting your application.