Every home must have things that were made using faux fur. Whether it’s a bag, a collar, interior items, or even a fur coat, at one point you will notice that the product has become less attractive, and its presentation is completely lost.

To revive your favorite item, you need to put in a little effort and dye or tint the faux fur yourself, even at home. Before starting work, analyze how your item looks and think about what you want to get after processing, because if you want to change the color radically, then you will have to tinker with the choice of dye, but if you only want to renew the item, then you need to choose tones closer to what color your product is.

In any case, regular hair dye is used as a dye, choosing a more durable and high-quality one. If you need to slightly refresh the product, you can use regular tinting shampoos.

Before painting, the product must be thoroughly cleaned; any traces of dirt or grease will cause the paint to apply unevenly, and some areas will not be touched up at all. About a day before dyeing, wipe the contaminated areas with a cotton swab, which is soaked in a soap solution or water. detergent(anyone).

Once the faux fur is dry, find a small area that won't be visible and do a little testing. Paint it, and after drying, see if this is the color you wanted to achieve. If you are happy with everything, then start painting the entire product.

The product itself needs to be slightly stretched before starting work. This is necessary so that some areas do not go unnoticed. You can use a chair or a regular chair as a stretch. wooden board, you can secure the product using clothespins.

Dilute the paint according to the manufacturer's instructions; when painting, use a soft brush. All movements during work are carried out only in the direction of the faux fur hairs, while lightly pressing the brush to grab the base fabric.

When painting is completed, wait the time specified by the manufacturer. Rinse off the paint with gentle movements, trying not to damage the fur. You can use a clean, damp swab to remove excess paint.

While still wet, the artificial fur after dyeing is combed and left to dry, then combed again, straightening the fibers in the desired direction. After drying, the product will acquire a new, bright and rich shade.

Please note that you can remove the item from the stretch only after the fur is completely dry, otherwise the faux fur item may change significantly in size. It may become smaller or it may simply be “pulled” in some direction.

Well, now your favorite thing looks attractive again and its color is almost impossible to distinguish from the original color! If the shade does not suit you, you can repeat the painting after a week.

Products made from faux fur (bags, fur coats) are visually almost indistinguishable from natural products and allow you to save on purchases. But during use, things inevitably lose their attractiveness and look faded, dull and worn out. The situation is easy to fix if the owner of the item knows how to dye faux fur at home.

How to choose paint?

Restoring your favorite item will require some time and effort. Choosing paint is the first task that needs to be resolved before starting work. To decide on the right color, it’s enough to imagine the product after dyeing and understand how you want to see it. If the owner only plans to restore things to their lost beauty, shades that are as close to natural as possible suit him. Whereas a radical change in color implies a careful choice of dye.

Faux fur is dyed using standard hair dye. It is important that the mixture is of high quality, provides a stable result and does not spoil the material. Shampoos and tonics will help those who are only going to slightly “refresh” their clothes or accessories without radically changing their color.

Where to start coloring?

Preparing faux fur for dyeing begins with thorough cleaning of the product. Traces of grease and dirt will negatively affect the result, the color will be uneven and will not appear completely. Contaminated areas should be treated with soapy water (it is convenient to use cotton wool) the day before the procedure.

After the fur has dried, testing is required. It consists of applying paint to a small area located in inconspicuous places. If you are satisfied with the resulting color, you can move on to working with the entire thing. So, how to dye faux fur at home?

How to dye faux fur correctly

To paint each area evenly, you need to slightly stretch the fur before applying the mixture. For convenience, you can take a wooden board, a chair, use clothespins and similar products.

When diluting paint, it is important to strictly follow the instructions; a soft brush will do as a handy tool. Coloring is carried out strictly in the direction of the hairs. To dye the base fabric, light pressure on the brush is required.

After applying the paint, you need to wait until the time has elapsed, information about which is in the instructions. Then the faux fur product is carefully cleaned (washed with water). It is convenient to remove dye residues with a clean, damp swab.

You should not wait for the material to dry before combing it; this should be done immediately after dyeing. Next, you need to give the faux fur time to dry completely and go over it with a comb again, giving the fibers the required position. Now you can admire the achieved result - the thing again began to look “like it came from a store.”

It is important to know

The stretch remains until the product dries completely, otherwise a change in its size is inevitable. The item can not only shrink, but also stretch unsightly, as a result of which it will look even worse than before work. It is not always possible to achieve the desired color the first time you dye it (especially if you have no experience). In this case, it is allowed to subject the artificial fur to this procedure again. It is only important that at least 10 days have passed since the first attempt.

You also need to understand that the result depends on the degree of wear. Unfortunately, not all products that have been in use for a long time are subject to rehabilitation.

Have you ever thought about how to dye fur at home? But surely every modern fashionista has a vest, sheepskin coat or fur coat made of natural or faux fur in her wardrobe. During operation, the fur can change its original appearance, burn out in the sun, or maybe you’ll come up with the idea of ​​​​changing the appearance of an old thing. Today, service organizations, represented in sufficient numbers, provide a full range of fur dyeing services, but, unfortunately, with an impressive cost, they do not always meet customer expectations. That is why the question of how to dye fur at home, whether it is even possible to carry out this procedure yourself, is very common today. We will talk about it within the framework of this material.

Preparatory activities

The success of the “operation” largely depends on how well the preparatory measures are carried out. When you decide to update the shade of your fur or radically change it, do not forget to clean it, because dirt prevents deep penetration of the dye and, accordingly, affects the result of dyeing.

To clean, you will need an alkaline solution made from a liter of water, 2 teaspoons of soda, 1 teaspoon of any dishwashing detergent and 1 teaspoon of ammonia, which can be purchased at your nearest pharmacy. All components must be thoroughly mixed together until a homogeneous mass is obtained. To prevent drying out, apply to the inner layer (the bottom layer of the skin). fat cream, for example, children's. Then, armed with a brush with stiff bristles, apply an alkaline solution to the fur, spreading it over the entire surface, then rinse the product thoroughly under running water and lay it in a horizontal position to dry.

What to paint with?

If you don’t know how to dye fur at home or what products to use, you’ve come to exactly the right place. Today, specialized stores offer quite a few professional dyes and compositions, but hair dye is still no less effective and affordable. You can find it in any supermarket at an affordable price, and the variety of shades allows you to satisfy the taste preferences of every fashionista.

So, for dyeing you will need paint, a brush with which you will apply the composition to the fur and, of course, rubber gloves - an indispensable means of protection. When choosing a brush, give preference to one with stiff bristles.

Arctic fox fur

How to dye arctic fox fur at home? Luxurious vests made from arctic fox skins have been a trend for the last few years. They will be relevant in the near future, which is why owners of such luxury need to properly care for it: update the shade of the fur every season, clean it. In addition, modern dyes allow, if necessary, to radically change the color of a fur product. So why not take advantage of this opportunity?

Deciding on the shade

If you don't know how to paint natural fur at home, in particular, arctic fox fur, it is important to become familiar with some of the nuances of the procedure. They are primarily associated with the structural features of the fur. Of course, the choice of shade lies on the shoulders of the owner of the fur product, but professionals strongly recommend dyeing arctic fox fur in dark shades. If, on the contrary, you want to lighten the product, you will have to pre-treat the fur with hydrogen peroxide.

Let's start painting

To get maximum results, wet the arctic fox fur with water, then begin applying the coloring composition, paying attention to each area. After the entire composition has been applied, it is necessary to maintain the time indicated on the packaging. After this, it is enough to rinse the product under running water and dry it, placing it in a natural horizontal position.

Mink

Mink hair is identical in structure to human hair, which is why the choice of dye for mink should be more demanding. The same hair dye is perfect, but it’s better to give preference professional series, which will give the most natural natural shade, and will last much longer than budget analogues. But some people recommend using spray paints. In this case, paint must be applied from a distance of 60-70 cm in several layers. Don’t be afraid to layer the paint - this technology will allow you to achieve an expressive and deep noble shade.

If you are looking for an answer to the question of how to dye mink fur at home, use general rules, working with any fur. In all respects, the dyeing procedure completely repeats the procedure for transforming arctic fox fur described above.

Mouton fur

This once most popular type of fur is still relevant today. Its popularity is largely due to the warmth and comfort that a product made from mouton fur gives. But not everyone knows how to properly care for fur, which is why, over time, there is a need for additional coloring.

Mouton products are rightfully one of the most unpretentious, but when it comes to coloring, you should be patient, be extremely careful and careful. How to dye fur at home with paint in the case of a mouton. The pile of such fur is quite thick and dense, which is why it is so important to evenly distribute the coloring composition over the entire surface.

And one more thing: before dyeing, test a small amount of pigment on a small area of ​​the fur product - if stains and bald spots appear, it is better to abandon the idea of ​​dyeing it yourself and entrust it to professionals.

Artificial fur

Do you think only natural fur evokes admiration and admiring glances from others? For several years, faux fur products: bright, sometimes extravagant and quite affordable models, have been revolutionizing the entire idea of ​​fashion, beauty and luxury. If you have a jacket or bag made from this material in your wardrobe, update it with dyeing. Want to know how to dye faux fur at home? We'll tell you about it.

The same hair dye is suitable for coloring - in the case of faux fur, you can experiment and give preference to brighter, acidic shades. For preliminary preparation, an ordinary soap solution is suitable, which is applied with a sponge over the entire surface of the product.

In order to get an ideal result, before painting, do not just lay the product in a horizontal position, but also stretch it well. This will help avoid the formation of bald spots.

Let's sum it up

We tried to figure out how to dye fur at home, and listed several of the most effective ways. With the proper approach to the procedure, using high-quality materials and tools, you can achieve amazing results. In addition, dyeing fur, both natural and artificial, at home will not take you much time and, most importantly, money. We hope that you will appreciate the information presented and be sure to take advantage of our tips and recommendations.

During prolonged wear, a fur product may lose its attractiveness only because the fur has faded either from the sun or from exposure to precipitation. In this case, there are two ways of restoration. Specialized enterprises that provide dry cleaning and painting services know how to do this efficiently. But you can give a “second life” to your favorite thing at home. By following the instructions and applying some of your own imagination, you will be able to create a unique work of art.

If the age of a fur product is indicated by its color, then you can update the appearance by painting.

For gray astrakhan, only black or brown is used. Mink is dyed in its native colors in order to restore faded shades. Black or brown pigment is suitable for mouton products. Fur items in beige tones are dyed in all shades of brown to enhance the intensity of the native color. Choose a paint one or two shades darker for the job.

The main condition for high-quality and uniform dyeing is clean fur. The best remedy An alkaline solution proved to be suitable for cleaning; its composition is as follows:

• soda (dessert spoon);
• salt (dessert spoon);
• ammonia (teaspoon);
• about 15 drops of detergent
• 1 liter of water.

Lightening yellowed white fur is an additional element of color restoration. To do this, use a solution with hydrogen peroxide (a teaspoon) and ammonia (10 drops). This product can remove yellowness from the fur of a silver fox. When processing with this composition, deep soaking should be avoided. First, make a test on an inconspicuous area of ​​the product. 15 minutes is enough for lightening. We must remember that a longer process will make the ends brittle.

Chalk and starch help remove yellowness from the fur of a gray rabbit for a while. The powder is rubbed evenly and with little effort over the top of the pile and shaken off. This method will not harm the product, so it can be used often. Gray rabbit fur is dyed with hair pigment. There is also an absolutely safe method in which an aqueous solution of bluing is carefully applied with a brush to the entire surface of the product. The composition should be light blue.

To enhance faded raccoon fur, use hair dye with a lightening effect, as a result of which the product will look gold-plated or silver-plated.

You can renew fox fur with thick potassium permanganate. Treat it carefully with a sponge, not allowing things to get wet.

The faded ends of the fur are painted with suede spray paint. Spray the product slowly, keeping a distance of about 70 centimeters between the fur coat and the sprayer.

How to dye fur with hair dye?

For coloring Arctic fox or mink on our own hair dyes are suitable. This method has been tested in practice and always gives positive results when painting not too old things. It is better to first test the effect of even high-quality products on a small, inconspicuous area of ​​the product.

To dye fur at home, you will need to follow these steps:

1. Straightening the strands of natural fur, apply a thin layer of fatty cream or glycerin to the flesh.
2. Gently moisturize the entire fur surface.
3. Apply the product as carefully as when coloring your hair.
4. Leave it for a while. Duration of dyeing - according to the instructions on the packaging with the dye.
5. To enhance the effect of the paint, apply a saline solution evenly over the entire surface.
6. Wash off the paint under the flow of water from the shower.
7. Remove excess with rags or blotting paper.

After drying, the fur is combed, observing the natural direction of the pile. This dye lasts on a fur item for up to six months, and this is often enough to make the item look renewed.

A simplified option for saturating the tone is to color it with a tinting shampoo (according to the instructions on the package).

Homemade stencils are used for painting with multi-colored paints. The spots are painted one at a time.

Faux fur is easier to dye. You can use tinting shampoo and hair dye. The sequence of actions is as follows:

1. Before dyeing begins, the product is fixed.
2. Apply the product in the direction of the fibers.
3. Leave the paint to soak in. The time must match the instructions in the instructions.
4. After the procedure, the fur is washed, dried and combed.

Experts do not recommend experimenting with coloring new things.

Home or professional dyeing extends the life of a fur product for a short time. After some time, the pigment comes off and the item becomes faded again.

The fur fades in the sun. Precipitation also affects its brightness. As a result, even the most expensive and quality fur coat Over time it begins to look shabby and old. Painting will help get rid of signs of wear.

First, clean the fur: comb it, remove dust and other small debris. If you do not do this, foreign particles will not allow the paint to lay down evenly. Then choose the product you will work with. Remember that even the most durable options will only maintain a given color for 1 season. By the time the next one begins, there will be no trace left of the painting.

How can you dye fur?

Most often, housewives turn to either professional dyes designed for use on fur products, or regular hair dye. The latter will have to be purchased from large quantities. Especially if the pile is long, thick, and the fur coat is not a shortened model.

Also It is definitely worth conducting a compatibility test. Apply the purchased dye to an inconspicuous area of ​​fur. Follow the allotted time. Rinse it off. Wait a couple of days. If nothing bad happens to the item during this period and you are satisfied with the resulting shade, proceed with full-scale painting.

What is needed for the job?

List of items and materials that will be needed in the process:

• salt, soda;
• glycerin, ammonia;
• specialized product for washing fur items;
• water.

Self-painting algorithm

So, you need:

Before applying some types of paint, you will have to wet the fur. Just spray some water from a spray bottle.

Important nuances

When applying, try to cover all areas, don't miss anything, but move quickly. Otherwise, one part of the product will be painted better than the other. This will happen due to the different duration of exposure to pigments. If you have problems with the speed of completing tasks or have no experience, you should resort to a spray gun. Just don't bring it too close to the item of clothing. You need to spray from a distance (about 50 cm).

Important! If you use specialized paint sold in cans, you should spray it from a distance of 60–70 cm.

After application is complete, let the paint sit for the required time. The waiting time depends on the active dyes, but usually the instructions say 30–45 minutes. After the allotted time has passed, rinse the fur coat in a vinegar solution and blot the pile with paper towels. This will remove any remaining paint.

Squeezing by hand, twisting, running sponges over the product or performing other manipulations aimed at speedy drying is prohibited. For this purpose, you can only use napkins.

The next step is optional, but recommended. Experienced housewives advise immediately after removing any remaining dye, apply a mask for colored hair to the undercoat. Best fit professional products, which not only protect the color from being washed off, but also take care of the hair structure. Their effect will be noticeable within 2–5 minutes. After this time, rinse the clothes again.

How to dry it properly?

After all the work, the fur coat is placed on wide hangers that fit perfectly in size. It is also worth paying attention to what material the item is made of. Thin steel simply cannot withstand it and will bend from the weight of a damp fur coat, if it is, say, mink or sable fur. That is, there is no point in relying on the fact that the hanger has never been deformed under a fur item before, because up to this point the outerwear has always been dry.

Best option: durable wooden hangers. Place them together with a short fur coat in a warm room. Try to ensure that heating devices, if they are working, are as far away from the fur as possible. If you don’t have good hangers at hand, you can resort to another drying method.

Algorithm of actions:

• let the water drain;
• apply glycerin and set the direction of the pile, if necessary;
• fold in half;
• place on a hard, flat surface (fur should be on top);
• place a well-absorbent cloth;
• Periodically replace the absorbent cloth with a dry one.

At first you will have to do this every 1.5-2 hours, then the duration of the break will begin to increase. In general, drying a fur coat takes from 3 to 5 days. During this time, experts recommend combing the product and inspecting its undercoat for strange changes.

If bald spots, deformation or other defects appear, immediately seek help from a dry cleaner. Perhaps the fur can still be saved.