From multi-colored plasticine you can sculpt vegetables, fruits, animals, birds, fish, interior items, cartoon characters, etc.

The thing is that this material is very plastic. In my step-by-step master class with photographs, I will explain and show how to make an aquarium fish.

So, we need plasticine in the following color shades:

1. blue;
2. blue;
3. pink;
4. yellow;
5. black.

Steps to create a fish from plasticine:

1. From a piece of blue plasticine we make the body of a fish. It somewhat vaguely resembles a droplet.

2. We make a tail, lower and upper fins from blue. Attach new elements to the base.

3. We make a black eye in the shape of a miniature ball and a sponge in the form of two fastened ovals.

4. We make a long and thin rope from yellow plasticine. To do this, you need to roll it between the working surface and your palm. Next, we divide the resulting sausage into several parts and decorate the body of the fish with them.

That's all! The funny sea figurine is ready! I wish you great success in your creativity!

Print Thank you, great lesson +19

Don't have time to go fishing with your child? No problem. If the baby is still small, then such an interesting activity can be replaced. For example, parents can buy their child bright plastic fish, which are very interesting to swim with in the bath. But naturally, the child will be delighted if he is offered to make fish with his own hands. What other material can you come up with to implement this idea, besides plasticine? Their colorful, pliable pieces will make a great fish to play with. Choose any shades of plasticine, but the hardness should be such that it is not tiring for the baby to work with the mass. Other lessons on the underwater world:

Step-by-step photo lesson:

The fish can be made of plasticine of any color. One option is enough. You will also need rhinestones or beads to make shiny eyes. The main tool is the stack.

Cut the required amount of plasticine from the block and roll it into a ball.

Draw the ball out into a bullet, then lightly press the rounded piece onto a hard surface to make it flatter. Turn one side into a head, marking it with the same stack.

To create the fins, place small cakes on top and bottom in a row.

Use a stack to create membranes on the fins.

Attach the fish tail to the back, also finishing it with a stack.

Think about how you would like the scales on the fish's body to look. You can stick plasticine on top, placing small dots overlapping. And we suggest simply piercing the soft plasticine with the tip of the stack many times over the entire surface of the craft.

The final touch is the design of the fish’s face. Stick on shiny rhinestone eyes and attach a mouth.

A plasticine fish is ready to surf the waters. Take some water into a children's bucket and put the fish in it. Plasticine does not become limp from water, so such activities can be practiced.

This exciting activity allows them to develop finger motor skills, learn new properties of objects: color, stickiness, shape, and so on. Children love to create various animals, birds, and creatures that they come up with themselves from this viscous material.

Types of plasticine

You can buy it in stores different types plasticine:

• Classical. Can be soft or hard. When working on paper, greasy marks may remain.
• Ball. It can be drying, that is, after some time it hardens in air, and non-drying (reusable).
• Safe. Made from plant materials. If a small child puts plasticine in his mouth, it will be harmless to him. The only thing is that it doesn't taste good. Therefore, the child is unlikely to want to put it in his mouth again.
• Wax. Very soft, not sticky. The enemy of such plasticine is elevated temperature. In this case, it melts and becomes unusable.

• Floating. Very light, so it floats easily on the surface of the water. The child will enjoy playing with it while swimming.
• Fluorescent. This type will not leave any child indifferent.
• Pearl. The chic mother-of-pearl shine is suitable for sculpting fabulous products.

How to make a fish from plasticine

From all of the listed types of plasticine you can make original things and animals. Let's look at an example of how to make a molded fish from plasticine.

Depending on the further function of the future fish, suitable plasticine is selected. Choosing a color is not a very important procedure, since the fish can be any. It is advisable to wear an apron to avoid getting dirty. Be sure to check availability necessary tools: lids of different sizes, steak for cutting plasticine, special knife. You can use a comb to make the fins and tail of the fish.

Take plasticine. A circle is rolled out of it, approximately the size of a fish’s head. The resulting ball is slightly flattened. Next, another plasticine is taken, rolled out, flattened and cut into three parts with a knife, from which fins and a tail are made. Using a comb, they are decorated with tooth marks. Next, the resulting parts are attached to the head of the fish. Small balls are then rolled out and attached like lips. The lids make small imprints of the gills. The final touch is to draw scales on the body of the resulting product using the body of the pen. Beads are attached instead of eyes. The plasticine fish is ready.

Then it can be glued to the frame and decorated with various seaweeds also made from plasticine. The resulting picture can be hung on the wall or given to friends. In any case, it will give an unusual look to the room.

DIY goldfish

A handmade goldfish made from plasticine turns out extraordinarily beautiful. It is made according to the same scheme that was presented above, or you can come up with your own.

To make it “golden”, you can use yellow plasticine and make a crown on your head. Then no one will doubt that this is really a goldfish from the fairy tale of the same name by A.S. Pushkin. Or you can paint the resulting figure with appropriate paint. Then you will definitely get a plasticine goldfish.

Familiar plasticine fish? Of course, this is the famous Dory - the sweet but forgetful heroine of the popular cartoon. Now you can make it yourself to create even more exciting adventures!

Conduct a simple modeling master class with your child to develop his fine motor skills, perseverance and accuracy. The result of your joint creativity is a neat figurine that exactly replicates the original from the big screen.

Plasticine fish “Dory” step by step

To create a craft, prepare ordinary children's plasticine (blue, yellow, black, white, lilac), as well as:

• plastic stack
• rolling pin
• modeling board

To keep clothes perfectly clean, put your child on a children's apron for creativity.

STEP 1. Shape a piece of blue plasticine into a teardrop shape. The sharp tip remains untouched, but the wide one needs to be processed on both sides: make an incision on the left (the character’s future smile), and on the right, flatten it with your fingers and form convex tubercles over the resulting indentations (the eyes will be located under them).

STEP 2. Also try to make the mouth of the fish in relief: carefully sculpt the tongue with a stack.

It is important that the figure is symmetrical on both sides.

STEP 3. Attach lilac and black cakes to the white ball (size in descending order) - you get an eye!

STEP 4. Roll out black plasticine thinly using a child's rolling pin and use a stack to cut out an ornament for Dory's scales. The shape of this pattern resembles the letter “a” with a small loop and a long hook curved to the left. You need to make 2 such parts: attach them to both sides of the craft, so that between them there is a blue comb about 1 mm high.

STEP 5. The photo shows why the above-mentioned blue stripe was needed: using a stack, draw the dorsal fin.

STEP 6. The final decorative touches remain: for the tail, prepare 1 large yellow piece in the shape of a triangle and 1 long black flagellum, and for the side fins - 2 blue cakes, 2 small yellow triangles and 2 short black flagella.

STEP 7. Attach all the listed parts to the toy, as shown in the photo. Using a stack, make characteristic grooves to give the craft maximum realism. Your personal Dory is absolutely ready!

Advice: try using a hardening modeling compound as a material (for example, Play-Doh, Creatto) or polymer clay. In both cases, your craft will be durable and can be painted to play with friends.

Now you know how to make a plasticine fish step by step, so you can place charming Dory in your home. Start your collection of cartoon characters with it!

Material for GCD: plasticine, stacks, modeling board, napkins, caps from felt-tip pens, beads for eyes, fish toys, technological maps. Musical accompaniment: plastic sketch, sound of the sea.

Goals and objectives: Develop the ability to convey distinctive features fish (body, eyes, mouth, fins, tail, scales).

To consolidate knowledge of techniques for making oval-shaped objects (rolling with straight movements of the palms, sculpting with fingers). Strengthen the techniques of pulling and flattening when passing characteristic features fish.

Foster creativity and imagination; the ability to finish what you start.

Preliminary work: Looking at illustrations with aquarium fish, looking at fish in an aquarium.

Progress of the lesson

1 . Introductory part. The teacher gathers the children near him on the rug and asks a riddle:

“There is a transparent miracle house,

There are fish in it day and night.”

Children: Aquarium.

Educator: That's right, this is an aquarium. What are the names of the fish that live there?

Children: aquarium

Surprise moment: Guys, we have an unusual aquarium in our group. (The teacher shows the aquarium made in advance). Who lives in it? (Fish).

Guys, it’s very boring for a fish to swim alone in an aquarium, should we create a lot of different fish to make it more fun?

Part 2 Main. Sit on the mat. Let's look at what the fish has. (The teacher shows a rubber fish).

What shape is the body of the fish? (Children name the shape of a fish).

What shape are the fins? (Triangular, round shape).

What tail? (With corners)

How many eyes? (Two).

Does the fish have a mouth? (Yes).

What is the body of a fish covered with? (Scales).

Let's imagine that we are algae at the bottom of the sea. Let's sway to the music.

Plastic sketch, imitating the vibrations of algae in the depths of the sea to the music.

The children sit at the tables. The teacher draws attention to the pattern of sculpting the fish. He tells and shows in what order to sculpt: how to make the body, head, tail, fins, eyes, scales of the fish.

Educator: You need to divide the block of plasticine into 2 unequal parts. The larger part is the body, the smaller part is the tail. We start work with the body of the fish. Roll into a ball. How to do it? (Circular movements of palms) Show how you will work. (Children show without plasticine). Well done! Then slightly stretch the ball using straight movements of the palms to form a roller. Show me how? (Children show without plasticine). Well done! The body is ready. Take a small piece of plasticine and sculpt a tail. Roll into a ball, flatten it slightly, and make a cut in a stack. We connect the tail with the body, apply it with our fingers, smooth it so that the fish turns out even and smooth. To make a mouth, you need to push a hole with a stack. Lightly flatten the finished fish between your palms. We decorate the eyes of the fish. And we will make the scales using caps from felt-tip pens, lightly pressing on the body of the fish.

To prepare our hands for sculpting, we will play a finger game:

“Fishes swim, dive,

In clean, fresh water.

They will bend, unbend,

They will bury themselves in the sand."
Once! Two! Three! Four! Five!

Fishes swim along the bottom

You won't catch a single one!

Adelina, tell me where to start working. (1-2 children tell the sequence of work). Well done. Now, sit down correctly, let's start working.

Independent work children.

During work, calm music sounds with the sound of the sea. The teacher, if necessary, provides individual assistance to children and gives advice. Pays attention to posture.

3. Final part.

Educator: It's time to move in the residents. Where will our fish live? (In aquarium). Let's put them in an aquarium.(Those children who sculpted the fastest can be asked to sculpt pebbles for the aquarium). Children put fish in an aquarium .

Lesson summary: Guys, what beautiful fish you got. Who has the biggest? (smallest, funniest, cheerful, beautiful...)

Children, what did we sculpt today? (fish). Well done, now our fish will not be bored, she has many cheerful friends.
And your parents will look at your work in the evening and be happy for you.

MDOU Tsilninsky kindergarten"Terem-Teremok" Municipal Municipality "Tsilninsky District"

SUMMARY OF THE OPEN NODE ON MODELING

IN THE MIDDLE GROUP "BUNNY"

"FISH IN THE AQUARIUM"

Compiled by: teacher of the highest category:

Torutanova E.E.

2017