New road signs introduced 01.2006

2. Signs “Zone with maximum speed restrictions.”
They are installed within the boundaries of the site on which they operate.

3. Pedestrian zone signs
indicate areas where only pedestrian traffic is allowed.

4. “Regulated parking zone” signs
indicate the method of parking and the duration of the sign.

5. “Settlement” signs
will tell the driver that he/t/dorogi_rossii/ needs to reduce the speed to 60 km/h.

6. Sign “Direction of turn”
will indicate the detour direction.

7. “Harness” sign
stands for speed bump.

8. Congestion sign
will warn drivers about traffic jams.

9. “Dangerous Roadside” sign
They will put it where it is better not to leave the road.

10. Sign “Intersection with a secondary road”
will help you find the lane.

11. Sign “Turn right (left)”
will indicate the direction of movement.

12. “Control” sign
will appear at police posts, entrances to border and closed areas, as well as on toll roads. A stop is required!

13. Beach or Pool Sign
will indicate where you can refresh yourself.

14. Sign “Radio communication area with emergency services”
will tell you which radio channel owners of portable civilian radio stations should switch to.

15. Sign “Reception area of ​​a radio station transmitting traffic information”
If you have a shortwave radio station installed in your car, then to communicate you need to switch to the specified frequency.

16. Sign “General maximum speed limits”
will appear at all entrances to Russia and will inform visitors about speed limits on our roads.

17. Plates “Type of route vehicle”
will be installed at “intercept” parking lots and will tell drivers where to go next.

Warning signs

Priority signs

Prohibition signs

Mandatory signs

4.1.1 "Moving Straight" 4.1.2 "Move to the right" 4.1.3 "Move to the left" 4.1.4 "Move straight or right" 4.1.5 "Move straight or left" 4.1.6 "Move right or left"
Driving is allowed only in the directions indicated on the signs arrows. Signs that allow left turns also allow U-turns. (signs 4.1.1 - 4.1.6 with arrow configurations can be used, corresponding to the required directions of movement at a specific intersection). Signs 4.1.1 - 4.1.6 do not apply for route vehicles. Signs 4.1.1 - 4.1.6 apply at the intersection of roadways in front of which there is a sign. The effect of sign 4.1.1 installed at the beginning of the road section is extends to the nearest intersection. The sign does not prohibit turn right into courtyards and other areas adjacent to the road.
"Roundabout Circulation" Movement in the direction indicated by the arrows is permitted.
"Bike Lane" Only bicycles are allowed and mopeds. On the bike path they can pedestrians can also move (in the absence of sidewalk or walkway).	"Footpath" Only pedestrians are allowed to move.
"Minimum speed limit" Driving is permitted only with the indicated or higher speed (km/h).	"End of restriction zone minimum speed"
Signs of special regulations Special regulations signs introduce or cancel certain traffic modes. "Motorway" Road on which the requirements apply Rules traffic Russian Federation, on highways. "The End of the Motorway" "Road for cars" A road intended for use only by cars, buses and motorcycles. "The End of the Road for Cars" "One Way Road" "The end of the one way road movement" "Entering a one-way road" Entering a one-way road or carriageway "Reverse movement" The beginning of a section of road on which on one or several lanes the direction of travel may change to the opposite. "The end of reverse movement" "Entering a road with reverse traffic" "Road with a lane for route Vehicle" The road along which route traffic vehicles is carried out on a specially allocated lane towards the general flow of vehicles. "End of the road with route lane Vehicle" "Out on the road with route lane Vehicle" "Lane for route buses" Vehicle" The road on which traffic route vehicles carried out according to a specially allocated lane towards the general flow Vehicle. The sign applies to the lane above which it is located. The action of the sign installed to the right of the road, extends to the right lane. Number of lanes and permitted directions movements on each of them. "Driving directions by lane" Allowed directions lane movement. Signs 5.15.1 and 5.15.2, allowing left turns from the leftmost lane, U-turns from this lane are also permitted. Signs 5.15.1 and 5.15.2 do not apply to route vehicles. The effect of signs 5.15.1 and 5.15.2 installed in front of the intersection applies to the entire intersection, unless other signs 5.15.1 and 5.15.2 installed on it give other instructions. "Start of the Strip" Beginning of an additional lane on the rise or braking lanes. If on the sign installed in front additional stripe, depicted sign 4.7 "Minimum speed limit", then the driver of the vehicle who cannot continue to move along the main road lane at the specified speed or higher, must change lanes. "Start of the Strip" The beginning of the middle section three-lane road intended "End of the Strip" End of the additional lane on the rise or acceleration lanes. "End of the Strip" End of the middle strip on a three-lane road intended to move in a given direction. "Direction of lanes" "Number of lanes" Indicates the number of lanes and lane modes. The driver is obliged to comply with the requirements of the signs marked on the arrows. If sign 5.15.7 shows a sign prohibiting the movement of any vehicles, then the movement of these vehicles in the corresponding lane is prohibited. Signs 5.15.7 with the appropriate number of arrows can be used on roads with four or more lanes. "Room for a U-Turn" Turning left is prohibited. "Turning Zone" Turning left is prohibited. "Bus stop location and (or) trolleybus" "Tram stop" "Taxi parking area" "Crosswalk" If there are no markings 1.14.1 or 1.14.2 at the crossing, sign 5.19.1 is installed to the right of the road on the near border of the crossing relative to approaching vehicles, and sign 5.19.2 is installed to the left of the road on the far border of the crossing. 5.20"Artificial hump" Indicates the boundaries of an artificial roughness. The sign is installed at the nearest boundary of the artificial hump relative to approaching vehicles. "Living sector" Territory in which they operate traffic rules in residential areas. "The end of the residential area" "The beginning of a settlement" in which the requirements of the Rules apply, establishing the order of movement in populated areas. "The end of a settlement" The place from which on this road the requirements of the Rules become invalid, establishing the order of movement in populated areas. "The beginning of a settlement" Name and beginning of the settlement, in which they do not operate on this road requirements of the Rules establishing traffic order in populated areas. "The end of a settlement" The end of the settlement indicated by sign 5.24. "Restricted parking zone" (section of the road) where parking is prohibited. "End of restricted parking zone" "Regulated parking zone" The place where the territory begins (section of road) where parking is permitted and is regulated using signs and markings. "End of regulated parking zone" "Zone with maximum speed limit" The place where the territory begins (section of the road) where the maximum speed is limited. "End of restricted zone maximum speed" "Pedestrian zone" The place where the territory begins (section of road) on which it is permitted pedestrian traffic only. "End of the pedestrian zone" On signs 5.20.1, 5.20.2, 5.21.1 and 5.21.2 installed outside a populated area, a green or blue background means that traffic to the specified populated area or object will be carried out, respectively, along a motorway or other road. On signs 5.20.1, 5.20.2, 5.21.1 and 5.21.2 installed in a populated area, a green or blue background means that movement to the specified populated area or object after leaving this populated area will be carried out, respectively, along a highway or other road; a white background means that the specified object is located in this locality. Information signs Information signs inform about the location of settlements and other objects, as well as about established or recommended driving modes. "General maximum speed limits" General speed limits set Traffic rules of the Russian Federation. Recommended speed on this section of the road. Sign area extends to the nearest intersection, and when sign 6.2 is used together with a warning sign, it is determined the length of the dangerous area. "Room for a U-Turn" Turning left is prohibited. "Turning Zone" Length of the turning area. Turning left is prohibited. "Parking area" "Emergency stop strip" Emergency stop strip on a steep descent. "Crosswalk" If there are no markings 1.14.1 - 1.14.3 at the transition, sign 6.16.2 is installed to the right of the road at the nearest border of the crossing, and sign 6.16.1 is to the left from the road at the far border of the crossing. "Underground pedestrian crossing" "Overground pedestrian crossing" 6.9.1 "Dead end" A road with no through passage. 6.9.1 "Advance direction indicator", 6.9.2 "Advance direction indicator". Driving directions to those indicated on the sign settlements and other objects. The signs may contain images of sign 6.14.1, highway symbols, airport symbols and other pictograms. Sign 6.9.1 may contain images of other signs informing about traffic patterns. At the bottom of sign 6.9.1, the distance from the place where the sign is installed to the intersection or the beginning of the deceleration lane is indicated. Sign 6.9.1 is also used to indicate a detour around sections of roads on which one of the prohibition signs 3.11 - 3.15 is installed. "Traffic pattern" Driving route when prohibited at the crossroads of individual maneuvers or permitted directions of movement at a difficult intersection. 6.10.1 "Direction indicator" Driving directions to route points. Signs may indicate distance to the object marked on it (km), plotted symbols of highways, airports, sports and other pictograms. "Object name" Name of another object, than a populated area (river, lake, pass, interesting place etc). "Distance indicator" Distance to populated areas (km), located along the route. 6.13 6.14.1 6.14.2 "Kilometer sign" Distance to start or the end of the road (km). "Routing number" Number assigned to the road (route). "Routing number" Road number and direction (route). "Traffic direction for trucks" Recommended direction of movement for trucks, tractors and self-propelled vehicles if their movement in one of the directions is prohibited at the intersection. "Stop line" Place where vehicles stop when prohibited traffic light (traffic controller) signal. "Detour diagram" A route to bypass a section of the road that is temporarily closed to traffic. "Preliminary indicator for changing lanes onto another roadway" Direction to bypass a section of the roadway closed to traffic on a road with a median or direction of travel to return to the right carriageway. On signs 6.9.1, 6.9.2, 6.10.1 and 6.10.2 installed outside a populated area, a green or blue background means that traffic to the specified populated area or object will be carried out, respectively, along a motorway or other road. On signs 6.9.1, 6.9.2, 6.10.1 and 6.10.2 installed in a populated area, inserts with a green or blue background mean that movement to the specified populated area or object after leaving this populated area will be carried out accordingly according to motorway or other road; The white background of the sign means that the specified object is located in this locality. Service marks Service signs inform about the location of the relevant facilities. "First aid station" "Hospital" "Gas station" "Maintenance cars" "Car wash" "Telephone" "Food station" "Drinking water" "Hotel or motel" "Camping" "Resting-place" "Road patrol post" "Police" "International road transport control point" "Reception area of ​​the radio station, transmitting traffic information" A section of road where radio station broadcasts are received at the frequency indicated on the sign. "Radio communication zone with emergency services" A section of road on which a radio communication system with emergency services operates in the civilian 27 MHz band. "Pool or beach" "Toilet" Additional information signs (plates) Signs additional information(plates) clarify or limit the effect of the signs with which they are used. 8.1.1 8.1.2 8.1.3 8.1.4 "Distance to object" 8.1.1 - The distance from the sign to the beginning of the dangerous section is indicated, place of introduction of the relevant restriction or a specific object (place) located ahead in the direction of travel. 8.1.2 - Indicates the distance from sign 2.4 to the intersection in the case if just before the intersection the sign is set to 2.5. 8.1.3-8.1.4 - Indicates the distance to an object located to the side from the road. 8.2.1 8.2.2 8.2.3 8.2.4 8.2.5 8.2.6 "Area" 8.2.1 - Indicates the length of the dangerous section of the road, marked with warning signs, or area of ​​prohibition and information and directional signs. 8.2.2 - indicates the coverage area of ​​prohibitory signs 3.27-3.30 8.2.3 - indicates the end of the coverage area of ​​signs 3.27-3.30 8.2.4 - informs drivers that they are in the zone actions of signs 3.27-3.30 8.2.5-8.2.6 - indicate the direction and coverage area of ​​signs 3.27-3.30 when stopping or parking along one road is prohibited the sides of the square, the facade of the building, and the like. 8.3.1 8.3.2 8.3.3 "Action Directions" Indicate the direction of action of signs installed in front of the intersection or directions of movement to designated objects, located directly next to the road. 8.4.1 8.4.2 8.4.3 8.4.4 8.4.5 8.4.6 8.4.7 8.4.8 "Vehicle type" Indicate the type of vehicle to which the sign applies. Table 8.4.1 applies the sign to trucks, including with a trailer, with a permissible maximum weight of more than 3.5 tons, plate 8.4.3 - on passenger cars, as well as trucks with a permitted maximum weighing up to 3.5 tons, plate 8.4.8 - for vehicles equipped identification marks "Dangerous goods". 8.5.1 Indicates the days of the week during "Method of parking a vehicle" 8.6.1 - indicates that all vehicles must be parked on the roadway along the sidewalk 8.6.2-8.6.9 - indicate the method of setting passenger cars and motorcycles in a sidewalk parking lot. "Parking with the engine not running" Indicates that in a parking lot designated sign 5.15, parking is allowed vehicles only with the engine not running. "Paid services" Indicates that services are provided cash only. "Stopping duration limitation" Specifies the maximum duration the vehicle is parked, indicated by sign 5.15. "Place for car inspection" Indicates that on the site designated sign 5.15 or 6.11, there is an overpass or inspection ditch. "Limitation of permitted maximum weight" Indicates that the sign applies only for vehicles with a permit maximum weight more than specified on the sign. "Dangerous Roadside" Warns that going to the side of the road is dangerous in connection with repairs carried out on it works Used with sign 1.23. "Main Road Direction" Indicates the direction of the main road at the crossroads. "Lane" Indicates the lane covered by the sign or a traffic light. "Blind Pedestrians" Indicates that a pedestrian crossing used by the blind. Applicable with signs 1.20, 5.16.1, 5.16.2 and traffic lights. "Wet coating" Indicates that the action of the sign extends over a period of time when the road surface is wet. "Disabled" Indicates that the effect of sign 5.15 applies only to motorized strollers identification marks "Disabled". "Except for disabled people" Indicates that the action of the signs does not apply to motorized strollers and cars on which they are installed identification marks "Disabled". "Dangerous goods class" Indicates the number of the class (classes) of dangerous goods according to GOST 19433-88. 8.20.1, 8.20.2 "Vehicle bogie type" Used with sign 3.12. Indicate the number of adjacent axles of the vehicle, for each of which the mass indicated on the sign is the maximum permissible. 8.21.1 - 8.21.3 "Type of route vehicle" Used with sign 6.4. They indicate where vehicles are parked at metro stations, bus (trolleybus) or tram stops, where transfer to the appropriate mode of transport is possible. 8.22.1 - 8.22.3 "Obstacle" They indicate the obstacle and the direction to avoid it. Used with signs 4.2.1 - 4.2.3. Plates are placed directly under the sign with which they are used. Plates 8.2.2 - 8.2.4, 8.13, when signs are located above the roadway, shoulder or sidewalk, are placed on the side of the sign. In cases where the meanings of temporary road signs (on a portable stand) and stationary signs contradict each other, drivers must be guided by the temporary signs. Note. Signs in accordance with GOST 10807-78 that are in service are valid until they are replaced in in the prescribed manner for signs in accordance with GOST R 52290-2004. Horizontal marking Horizontal markings can be permanent or temporary. Permanent markings are white, except for lines 1.4, 1.10 and 1.17, yellow; temporary markings are orange. Horizontal markings (lines, arrows, inscriptions and other markings on the roadway) establish certain modes and order of movement. Horizontal markings can be permanent or temporary. Permanent markings are white, except for lines 1.4, 1.10 and 1.17 yellow, temporary markings are orange Horizontal markings: 1.1 <*>- separates traffic flows in opposite directions and marks the boundaries of traffic lanes in dangerous places on the roads; indicates the boundaries of the roadway to which entry is prohibited; marks the boundaries of vehicle parking spaces; <*>The marking numbering corresponds to GOST R 5125 6-99. 1.2.1 (solid line) - indicates the edge of the roadway; 1.2.2 (dashed line, the length of the strokes is 2 times shorter than the spaces between them) - indicates the edge of the roadway on two-lane roads; 1.3 - separates traffic flows in opposite directions on roads with four or more lanes; 1.4 - indicates places where stopping is prohibited. It is used alone or in combination with sign 3.27 and is applied at the edge of the roadway or along the top of the curb; 1.5 - separates traffic flows in opposite directions on roads with two or three lanes; indicates the boundaries of traffic lanes when there are two or more lanes intended for traffic in the same direction; 1.6 (approximation line - a broken line in which the length of the strokes is 3 times greater than the spaces between them) - warns of approaching markings 1.1 or 1.11, which separate traffic flows in opposite or similar directions; 1.7 (dashed line with short strokes and equal intervals) - indicates traffic lanes within the intersection; 1.8 (wide broken line) - marks the boundary between the acceleration or deceleration lane and the main lane of the roadway (at intersections, road crossings on different levels, in the area of ​​bus stops, etc.); 1.9 - indicates the boundaries of the traffic lanes on which reverse regulation is carried out; separates traffic flows of opposite directions (with reverse traffic lights turned off) on roads where reverse control is carried out; 1.10 - indicates places where parking is prohibited. It is used alone or in combination with sign 3.28 and is applied at the edge of the roadway or along the top of the curb; 1.11 - separates traffic flows of opposite or similar directions on road sections where changing lanes is allowed only from one lane; designates places intended for turning around, entering and exiting parking areas, and the like, where traffic is allowed only in one direction; 1.12 (stop line) - indicates the place where the driver must stop when there is a 2.5 sign or when there is a prohibiting traffic light signal (traffic controller); 1.13 - indicates the place where the driver must, if necessary, stop, giving way to vehicles moving along the road being crossed; 1.14.1, 1.14.2 (zebra)- denotes a pedestrian crossing; marking arrows 1.14.2 indicate the direction of movement of pedestrians; 1.15 - indicates the place where the bicycle path crosses the roadway; 1.16.1 - 1.16.3 - denotes guide islands in places where traffic flows separate or merge; 1.17 - indicates the stopping places of route vehicles and taxi ranks; 1.18 - indicates the lane directions allowed at the intersection. Used alone or in combination with signs 5.15.1, 5.15.2; markings with the image of a dead end are applied to indicate that turning onto the nearest roadway is prohibited; markings permitting a left turn from the leftmost lane also permit a U-turn; 1.19 - warns of approaching a narrowing of the roadway (a section where the number of lanes in a given direction is reduced) or marking lines 1.1 or 1.11 separating traffic flows in opposite directions. In the first case, marking 1.19 can be used in combination with signs 20.1 - 1.20.3; 1.20 - warns of approaching marking 1.13; 1.21 (sign "STOP") - warns of approaching marking 1.12 when it is used in combination with sign 2.5; 1.22 - indicates the road (route) number; 1.23 - designates a special lane for route vehicles; 1.24.1 - 1.24.3 - duplicates the corresponding road signs and is used in conjunction with them; 1.25 - denotes an artificial unevenness on the roadway. (paragraph introduced by Decree of the Government of the Russian Federation dated January 24, 2001 N 67) Lines 1.1, 1.2.1 and 1.3 are prohibited from crossing. Line 1.2.1 may be crossed to stop a vehicle on the side of the road and when leaving it in places where stopping or parking is permitted. Lines 1.2.2, 1.5 - 1.8 are allowed to be crossed from any side. Line 1.9 in the absence of reversible traffic lights or when they are turned off is allowed to be crossed if it is located to the right of the driver; when reversing traffic lights are on - on any side, if it separates lanes on which traffic is allowed in one direction. When the reversing traffic lights are turned off, the driver must immediately change lanes to the right beyond marking line 1.9. Line 1.9, separating traffic flows in opposite directions, is prohibited from crossing when the reversible traffic lights are turned off. Line 1.11 is allowed to be crossed from the broken side, as well as from the solid side, but only upon completion of overtaking or detour. In cases where the meanings of temporary road signs placed on a portable post and marking lines contradict each other, drivers must be guided by the signs. In cases where temporary marking lines and permanent marking lines contradict each other, drivers must be guided by the temporary marking lines. Vertical marking Vertical markings in the form of a combination of black and white stripes on road structures and elements of road equipment show their dimensions and serve as a means of visual orientation. Vertical layout: 2.1.1 - 2.1.3 - designate elements of road structures (bridge supports, overpasses, end parts of parapets, etc.), when these elements pose a danger to moving vehicles; 2.2 - designates the lower edge of the span of tunnels, bridges and overpasses; 2.3 - denotes round bollards installed on median strips or traffic islands; 2.4 - denotes guide posts, grooves, fence supports, etc.; 2.5 - designates the side surfaces of road fences on small radius curves, steep slopes, and other dangerous areas; 2.6 - designates the side surfaces of road fences in other areas; 2.7 - denotes curbs in dangerous areas and raised traffic islands. This edition of road signs may be outdated!

Any company or company, any premises begins with a sign. From the very first moment you get to know the company, a sign on the door of an institution or office emphasizes its image and prestige, and simply helps you get your bearings.
In addition to the information function, plaques and signs can become an effective advertising tool and distinctive element corporate identity companies.
The types of signs are as follows - information plates, name plates, information signs, facade plates, signs.
Many people start searching for a manufacturer by searching the Internet for the following queries:
sign, making signs, whole door signs, buy signs, buy signs, door signs, etc.
But few people ask the question - is this a manufacturer or an intermediary who has no equipment at all and will sell you products three times more expensive.

Material and types of signs

There are two main materials from which signs are made - plastic and metal.

Plastic signs

Plastic signs can be made by laser engraving on plastic, which has two different colored layers - a thin top layer and a thick base layer. In this case, only two colors are possible, but if you have more than 2 colors, then we offer the direct UV printing method (you can read more below on this page).
Making signs on plastic happens as follows:
The laser burns out the top layer until the bottom main color layer appears. This is very fast and inexpensive when you have no more than 2 colors in your layout.
The thickness of 2-layer plastic can be 1.5mm for interior spaces And 3 mm for outdoor areas. The surface of 3 mm plastic is covered with a protective layer that is resistant to the city atmosphere.
The most popular sizes of plates: - 500x400 mm, 400x300 mm, 300x300 mm, 300x200 mm, 300x150 mm, 300x100 mm, 200x100 mm, 150x100 mm, 200x 50 mm, standard size information signs 150 x 150 mm.
The size of the products can be any size of your choice, but not exceeding maximum dimensions- 600 x 450 mm.
Mounting methods: signs are attached to the wall or door with special, high-strength tape, or using holders or dowels.

A large plastic manufacturer, Rowmark (USA), supplies about 300 types of plastic for laser and mechanical engraving. For ease of selection, all materials for engraving are divided into series, which have their own colors, thicknesses and physical properties.
Unlike cheap 2-layer plastics, Rowmark plastic has excellent quality, a large selection of colors and good wear resistance.
View materials for making plates from two-layer plastic - samples of 2-layer plastics for engraving.

Ritual tablets

Ritual nameplates carry information about those who are buried in the grave.
We produce such plates using engraving technology, they are all durable and do not require updating; it is possible to add decorative and religious elements, frames, photographs, and images.
Please note that finished products are available in only two colors - the background is one color, the text is another, for example, the background is gold, the inscriptions and design are black. Below are the most popular plastic colors.

The plastic is metallized and looks like metal, but it is a very practical material, does not deform and can withstand the effects of ultraviolet radiation and the external weather conditions of Russia (frost, heat, rain). The manufactured ritual tablet will not lose its original appearance: the image will not be washed off or erased, as it is embedded deep into the plastic. It won't be stolen since it's not metal. The most popular products are sizes 30x20cm and 30x15cm, but they can be customized. The cost of making ritual tablets depends on the area occupied. The presence of a frame around the perimeter increases the cost of the sign by 50%. There is also urgent production within 2 hours upon approval of the layout (check the possibility with managers and depends on the equipment load). If you need holes for fastening, please indicate the size of the holes or you can make them yourself using a regular drill.

Metal signs

Brass plate- the most popular type of metal signs, has a polished surface and polished chamfers.
The brass plate is made of polished brass, made in Germany.
Has a polished surface and polished chamfers. The thickness of the plate is 3 mm.
The design and text are deeply engraved and the relief is filled with black or colored enamel.
The image/text is made by etching or mechanical engraving, with the relief filled with black or colored enamel.
The brass plate is made by us from polished brass, made in Germany.

Distinctive features brass plates:

• Mirror diamond polishing.
• Ideal flat surface.
• Deep color fill.
• Decorative chamfer has a polished surface and polished chamfers.

The maximum size of brass products is 500 x 450 mm. Most popular sign sizes(may be different upon request):
500x400 mm, 400x300 mm, 300x200 mm, 300x150 mm, 300x100 mm, 150x100 mm, custom size
Mounting methods: using double-sided tape, screws with a decorative head or spacer holders. The signs can be framed with beautiful and high-quality Nielsen aluminum frames in various colors.
Duration from 10 days depending on complexity.

External signs (signs) for institutions

Mostly, signs similar to those in the photo shown are ordered government agencies and they are made 60x80 cm in size from PVC, framed with a Nelson profile, with anti-vandal outer plexiglass.
The cost of signs very much depends on the circulation or number of pieces, for example, a similar sign of 1 piece will cost 4500 rubles, and with a quantity of 10-15 pieces the cost is already 3000 - 3500 rubles.
Making plastic signs from plastic takes much less time and is cheaper in cost than from brass or other metals. This advantage of this material is used in cases where it is necessary to complete an urgent order at a budget price. Light in weight, easy to install, resistant to impact environment, expressive and memorable - and this is only part of the advantages of this type of product.

Sign mounts

One of the options is the BULLET LUX anti-vandal holder designed for attaching information signs at a distance from the wall. It consists of two elements: a housing that is attached to the wall, and a screw that holds the sign in place. Color gold, silver set 4 pcs.

Multi-color plates, full-color printing on any surface

Modern technology that allows you to apply full-color images to any type of surface, such as glass, mirror, plexiglass, wood, plastic, foam cardboard and rolled materials. This is especially in demand when it is necessary to combine several multi-colored images in one product.
PVC is mainly used as the main material. polymer material(thermoplastic). PVC is highly resistant to mechanical damage and is a highly flammable and self-extinguishing material. It is resistant to alkalis, acids, lime, as well as atmospheric influences and is absolutely harmless to humans.
Advantages:
special UV-curable paints are used to form a film, which is subsequently firmly fixed to the base, i.e. During printing, the ink does not penetrate into the structure of the material, but instantly hardens under the influence of UV lamps.
When using UV printing, there is no longer a need for additional protective laminating film, which significantly saves costs. The image applied to the surface is capable of maintaining the brightness and saturation of colors for quite a long time, and can withstand high operating loads, temperature changes, and weather conditions such as snow, rain or solar radiation.
It is also important that, compared to traditional printing, UV printing can be used completely freely in any interior without fear of emitting harmful fumes.

Our company produces OWN PRODUCTIONplaques and signs high level of quality from various materials: metal, plastic, plexiglass.
The cost calculation will mainly be entered based on the total area of ​​the product. If there is a frame made of 2-layer plastic, the price increases by 50%. If there is a frame made of brass, its price increases by 25%.

You can order the production of plates and signs, and any engraving on plastic in the online store.

We are pleased to offer our clients a new service - production of signs, office plates and signs, which are made of special two-layer plastic with a thickness of 1.5 mm or 3 mm using laser engraving. Plastics have a distinct metallic color like gold, silver, bronze, copper, steel, nickel.

Plates and signs made from this plastic do not fade and have a bright and respectable appearance.
The technology for applying graphic information is laser engraving, which allows you to reproduce information and logos from high accuracy. Signs and plaques can have standard or custom sizes and shapes.

It is very easy to attach the sign to a wall or door - you need to use screws or double-sided mounting tape. It is also possible to use shaped fasteners and decorative elements to attach the sign at some distance from the wall.
Facade signs are made of plastic for outdoor use, have a hard coating, are highly resistant to abrasion, corrosion, ultraviolet radiation, and humidity.

Below are the main colors of plastic for making signs and plates:

Internal office signs and signs.

Office signs, signs and indicators of this series are manufactured made of two-layer metal-colored plastics for indoor or outdoor use, depending on operating conditions. The thickness of the plastics is 1.5 mm. The signs are light in weight and can be easily secured using double-sided tape without the use of special tools.

The price for making signs is 2.5 rubles per sq.cm of product. For example, a sign 20cm x 30cm = 600x2.5 = 1500 rubles.

Plaques and signs are made made of high-quality two-layer plastic for laser engraving from Rowmark (USA).

To produce signs, you must provide a layout or information about the size and content of the signs. Layouts are accepted in in electronic format, or by phone indicating the information and size of the plate. The designers of our company will send you a finished layout for approval, and after approving the order, we we will make signs for you within 2-3 hours, depending on the equipment load. Urgent production possible without additional charges

We have been developing and manufacturing for Russia and the world for 15 years. In 2019, the team grew to 75 specialists, and the company area to 1500 m2. We are constantly improving processes and expanding.

1. Quality management system GOST R ISO 9001-2015.
2. Quality control inspection of each manufactured product.
3. Replacement of defective goods without questions and with delivery at our expense.

Optimal prices

We are always looking for ways to reduce costs for you both through technology and materials. We have been keeping prices at a constant level for 5 years thanks to growing production volumes.

Everything in one company: printing and coating, mechanical and laser processing, electronics. As production experts, we will help you make the right choice to solve your problems.

The average production time for 2019 is 5 days. We will ship part of the batch in advance. We don’t bury our heads in the sand during force majeure and are ready to compress deadlines. Warehouse of hundreds of types of raw materials weighing more than 10 tons.

We develop structures, electronics, 3D models. We prepare prototypes, test, and improve finished products. We are able to solve non-standard problems.

Companies have entrusted us with the manufacture of their products

Working days - average order completion time in 2019

Customers are satisfied with the quality of our products

Based on the results of weekly surveys.

our clients

Our signs are seen by millions of people across the country.

Show more

Delivery of signs throughout Russia, CIS and EAEU

We work with any transport companies.
We deliver to the point of delivery or to the door.
Free shipping to the IML TC issuance points in Moscow and St. Petersburg.

Typical product delivery times*

• Moscow and region - 1-2 days
• St. Petersburg - 1-3 days
• Central Russia - 1-3 days
• Ural, Siberia and Far East - from 2 days

* Check the deadlines with managers.

Requirements for sign layouts

We work in CorelDraw (.cdr) in CMYK colors. If you don’t have a layout, no problem, send me what you have. Remember: the more accurately it is conveyed appearance product, the faster we can make it.

Vector

More details

Collapse

We work with CorelDraw, Adobe Illustrator, SolidWorks, Autodesk Inventor, Compass 3D, STEP and STP formats. Keep the text editable with the included font. Make sure there are no text errors in the layout.
Download example

Drawing

More details

Collapse

In the drawing, indicate the overall dimensions of the product, the dimensions of all elements (holes, recesses, chamfers, graphic elements), and their locations. It is desirable that the drawing meets the requirements of the ESKD.
Download example

Scan

More details

Collapse

If you have a sample finished product and it can be placed in a scanner, then send scans. Scans better photo convey the dimensions and colors of the desired product. Perform scans with a resolution of 300 DPI.
Download example

Photo

More details

Collapse

Try to take a high-resolution photo so that the product is located in the center of the frame and not to the side. Full face. If the sample fits into the scanner, then send the scan.
Download example

Drawing

More details

Collapse

Draw how you see your future product, indicate the overall dimensions, the desired font and the color scheme in which it should be made.
Download example

Stages of work

What is important to know when ordering signs

Consider the service life and operating conditions.

All materials and application methods have their own service life. Nothing is eternal and over time, any material is destroyed. "Stressful" factors for signs: moisture (rain, snow, water), UV radiation, aggressive substances (acids, alkalis).
For example, applying film to a PVC sign is one of the most cost-effective options for making signs. But! The service life of self-adhesive film is on average up to 3 years. Plus, since this is an applique, the film is glued to the surface of the plastic and is not protected from vandalism. Therefore, such a sign is an excellent temporary option, if we talk about street conditions, and is suitable for permanent basis, if you need a sign for your office.
Let's consider another option, UV printing on a composite. The composite is a sheet material, aluminum with a colored polymer coating on the edges, and plastic in the center. Thanks to this design, it is lightweight and quite durable, while maintaining a low cost. UV printing is not afraid of moisture and sunlight, only a rough abrasive effect can spoil such an image. Therefore, a composite sign is an ideal solution for budget street signs. This is often done when making warning signs and safety signs.

If you have a drawing, provide it first.

If you have special requirements, indicate them at the beginning of the conversation. The more complete the list of requirements for the sign, the more effective the interaction with the manager will be.

If you have Brand Book, inform the manager about this at the stage of choosing the material

Getting the color to a certain specified shade is a separate task for production. Each material has its own texture and color. Each printing method works in its own color scheme. For example, powder paints are supplied in RAL colors. If, according to Brand Book, the color is indicated in Pantone, and you want the plate painted with powder, the manager will tell you that finding an identical shade in RAL is a great success.
When coordinating a color, you can always make a color proof. It will allow you to decide on the final shade and select equipment settings to order.

Plan to order signs in advance

Our company provides an urgent production option. If you need to meet a specific date, we are ready to make every effort to produce the signs on time. But you must understand that in this case, firstly, the number of options for technologies and materials will be reduced. For each technology, the production cycle takes a certain time, which cannot be reduced. Secondly, the price for urgent production is higher. And thirdly, if samples are required, we will not have time to make them.

If you did not find an example of a sign among our options

Connect a manager. Perhaps we did something similar and the manager will send photos of examples. If you haven’t done it, we’re ready to experiment!

Road signs that are in force on the roads in 2018:

1.1 "Railway crossing with a barrier."

1.2 “Railway crossing without a barrier.”

1.3.1 “Single-track railway”.

1.3.2 "Multi-track railway".

Designation of a railway crossing not equipped with a barrier: 1.3.1 - with one track, 1.3.2 - with two tracks or more.

1.4.1 - 1.4.6 “Approaching a railway crossing.” Additional warning about approaching a railway crossing outside of populated areas.

1.5 "Intersection with a tram line."

1.6 “Intersection of equivalent roads.”

1.7 "Roundabout intersection".

1.8 “Traffic light regulation”. An intersection, pedestrian crossing or section of road where traffic is regulated by a traffic light.

1.9 "Drawbridge". Drawbridge or ferry crossing.

1.10 “Departure to the embankment.” Departure to the embankment or shore.

1.11.1, 1.11.2 “Dangerous turn.”

Rounding a road with a small radius or with limited visibility: 1.11.1 - to the right, 1.11.2 - to the left.

1.12.1, 1.12.2 - “Dangerous turns”.

A section of the road with dangerous turns: 1.12.1 - with the first turn to the right, 1.12.2 - with the first turn to the left.

1.13 “Steep descent.”

1.14 “Steep climb.”

1.15 "Slippery road." A section of road with increased slipperiness of the roadway.
1.16 "Rough Road" A section of road that has unevenness on the roadway (undulations, potholes, uneven junctions with bridges, etc.).

1.17 “Artificial hump”. A section of road with artificial hump(s) to force a reduction in speed.

1.18 "Gravel release". A section of road where gravel, crushed stone and the like can be thrown out from under the wheels of vehicles.

1.19 "Dangerous roadside." A section of road where pulling off to the side of the road is dangerous.

1.20.1 - 1.20.3 “Narrowing of the road.”

Tapering on both sides - 1.20.1, on the right - 1.20.2, on the left - 1.20.3.

1.21 “Two-way traffic”. The beginning of a section of road (roadway) with oncoming traffic.

1.22 “Pedestrian crossing”. Pedestrian crossing marked with signs 5.19.1, 5.19.2 and (or) markings 1.14.1 and 1.14.2.

1.23 "Children". A section of road near a children's institution (school, health camp, etc.), on the roadway of which children may appear.

1.24 “Intersection with a bicycle path.”
1.25 “Road works”.

1.26 “Cattle Driving.”

1.27 "Wild Animals".

1.28 “Falling Stones.” A section of road where avalanches, landslides, and falling rocks are possible.

1.29 "Sidewind".

1.30 "Low-flying planes."

1.31 "Tunnel". A tunnel in which there is no artificial lighting, or a tunnel in which the visibility of the entrance portal is limited.

1.32 "Congestion". A section of road where there is a traffic jam.

1.33 "Other hazards." A section of road that contains hazards that are not indicated by other warning signs.

1.34.1, 1.34.2 “Rotation direction”. Direction of movement on a curved road of small radius with limited visibility. Direction to bypass the road section being repaired.

1.34.3 "Rotation direction". Driving directions at a T-junction or fork in the road. Directions to bypass the road section being repaired.

2. Priority signs

2.1 "Main Road". A road on which the right of way is granted to unregulated intersections.

2.2 "The end of the main road."

2.3.1 “Intersection with a secondary road.”

2.3.2 - 2.3.7 “Adjunction of a secondary road.”

Adjacent to the right - 2.3.2, 2.3.4, 2.3.6, to the left - 2.3.3, 2.3.5, 2.3.7.

2.4 “Give way.” The driver must give way to vehicles moving on the road being crossed, and, if there is a sign 8.13, on the main road.

2.5 “Driving without stopping is prohibited.” It is prohibited to drive without stopping in front of the stop line, and if there is none, in front of the edge of the roadway being crossed. The driver must give way to vehicles moving along the intersection, and if there is a sign 8.13 - on the main road.

Sign 2.5 can be installed in front of a railway crossing or quarantine post. In these cases, the driver must stop in front of the stop line, and if there is no stop line, in front of the sign.

2.6 “Advantage of oncoming traffic.”

It is prohibited to enter a narrow section of road if this may impede oncoming traffic. The driver must give way to oncoming vehicles located in a narrow area or the opposite entrance to it.

2.7 "Advantage over oncoming traffic."

A narrow section of road on which the driver has advantage over oncoming vehicles.

3. Prohibition signs

Prohibition signs introduce or remove certain traffic restrictions.

3.1 “Entry is prohibited.” Entry of all vehicles in this direction is prohibited.

3.2 “Movement is prohibited.” All vehicles are prohibited.

3.3 “The movement of motor vehicles is prohibited.”

3.4 “Truck traffic is prohibited.”

The movement of trucks and vehicle combinations with a permissible maximum weight of more than 3.5 tons (if the weight is not indicated on the sign) or with a permissible maximum weight more than indicated on the sign, as well as tractors and self-propelled vehicles is prohibited.

3.5 “Motorcycles are prohibited.”

3.6 “Movement of tractors is prohibited.” The movement of tractors and self-propelled vehicles is prohibited.

3.7 “Moving with a trailer is prohibited.”

It is prohibited to drive trucks and tractors with trailers of any type, as well as tow motor vehicles.

3.8 “The movement of horse-drawn carts is prohibited.”

The movement of horse-drawn carts (sleighs), riding and pack animals, as well as the passage of livestock is prohibited.

3.9 “Bicycles are prohibited.” Bicycles and mopeds are prohibited.

3.10 “Pedestrian traffic is prohibited.”

3.11 “Weight limitation”.

The movement of vehicles, including combinations of vehicles, the total actual weight of which is greater than that indicated on the sign, is prohibited.

3.12 “Limitation of mass per vehicle axle.”

It is prohibited to drive vehicles whose actual weight on any axle exceeds that indicated on the sign.

3.13 "Height limitation".

The movement of vehicles whose overall height (with or without cargo) is greater than that indicated on the sign is prohibited.

3.14 "Width limitation". It is prohibited to drive vehicles whose overall width (laden or unladen) is greater than that indicated on the sign.

3.15 "Length limitation".

The movement of vehicles (vehicle trains) whose overall length (with or without cargo) is greater than that indicated on the sign is prohibited.

3.16 “Minimum distance limitation.”

It is prohibited to drive vehicles with a distance between them less than that indicated on the sign.

3.17.1 “Customs”. It is prohibited to travel without stopping at a customs office (checkpoint).

3.17.2 "Danger".

The further movement of all vehicles without exception is prohibited due to a traffic accident, accident, fire or other danger.

3.17.3 "Control". Driving through checkpoints without stopping is prohibited.

3.18.1 “Right turns are prohibited.”

3.18.2 “Left turns are prohibited.”

3.19 “Turning is prohibited.”

3.20 “Overtaking is prohibited.”

It is prohibited to overtake all vehicles except slow-moving vehicles, horse-drawn carts, mopeds and two-wheeled motorcycles without sidecars.

3.21 “End of the no-overtaking zone.”

3.22 “Overtaking by trucks is prohibited.”

It is prohibited for trucks with a permissible maximum weight of more than 3.5 tons to overtake all vehicles.

3.23 “End of the no-overtaking zone for trucks.”

3.24 “Maximum speed limit.”

It is prohibited to drive at a speed (km/h) exceeding that indicated on the sign.

3.25 “End of maximum speed limit zone.”

3.26 “Sound signal is prohibited.”

It is prohibited to use sound signals, except in cases where the signal is given to prevent a traffic accident.

3.27 “Stopping is prohibited.” Stopping and parking of vehicles is prohibited.

3.28 “Parking is prohibited.” Parking of vehicles is prohibited.

3.29 “Parking is prohibited on odd days of the month.”

3.30 “Parking is prohibited on even days of the month.”

When signs 3.29 and 3.30 are used simultaneously on opposite sides of the roadway, parking is permitted on both sides of the roadway from 19:00 to 21:00 (rearrangement time).

3.31 “End of the zone of all restrictions.”

Designation of the end of the coverage area simultaneously for several signs from the following: 3.16, 3.20, 3.22, 3.24, 3.26 - 3.30.

3.32 “The movement of vehicles with dangerous goods is prohibited.”

The movement of vehicles equipped with identification signs (information plates) “Dangerous cargo” is prohibited.

3.33 “The movement of vehicles with explosive and flammable cargo is prohibited.”

4. Mandatory signs

4.1.1 “Move straight ahead.”

4.1.2 “Move to the right.”

4.1.3 “Move to the left.”

4.1.4 “Move straight or to the right.”

4.1.5 “Move straight or left.”

4.1.6 “Movement to the right or left.”

Driving is permitted only in the directions indicated by arrows on the signs. Signs that permit a left turn also permit a U-turn (signs 4.1.1 - 4.1.6 with a configuration of arrows corresponding to the required directions of movement at a particular intersection can be used).

Signs 4.1.1 - 4.1.6 do not apply to route vehicles. The effect of signs 4.1.1 - 4.1.6 extends to the intersection of roadways in front of which the sign is installed. The effect of sign 4.1.1, installed at the beginning of a section of road, extends to the nearest intersection. The sign does not prohibit turning right into courtyards and other areas adjacent to the road.

4.2.1 “Avoiding obstacles on the right.”

4.2.2 “Avoiding obstacles on the left.” Detour is permitted only from the direction indicated by the arrow.

4.2.3 “Avoiding obstacles on the right or left.” Detour is permitted from any direction.

4.3 "Circular movement". Movement in the direction indicated by the arrows is permitted.

4.4 "Bicycle path".

Only bicycles and mopeds are allowed. Pedestrians can also use the bike path (if there is no sidewalk or pedestrian path).

4.5 "Pedestrian path". Only pedestrians are allowed to move.

4.6 “Minimum speed limit.” Driving is only permitted at the specified speed or higher (km/h).

4.7 “End of minimum speed limit zone.”

The movement of vehicles equipped with identification signs (information tables) “Dangerous Goods” is permitted only in the direction indicated on the sign: 4.8.1 - straight, 4.8.2 - right, 4.8.3 - left.

5. Signs of special regulations

Special regulations signs introduce or cancel certain traffic modes.

5.1 "Highway".

A road on which the requirements of the Road Traffic Rules of the Russian Federation apply, establishing the procedure for driving on highways.

5.2 "End of the motorway."

5.3 “Road for cars.”

A road intended for use only by cars, buses and motorcycles.

5.4 “The end of the road for cars.”

5.5 “One-way road.”

A road or carriageway along which vehicle traffic across its entire width is carried out in one direction.

5.6 "The end of a one-way road."

5.7.1, 5.7.2 “Entering a one-way road.” Entering a one-way road or carriageway.

5.8 "Reverse movement".

The beginning of a section of road where one or more lanes may change direction to the opposite direction.

5.9 “End of reverse movement.”

5.10 “Entering a road with reverse traffic.”

5.11 “Road with a lane for route vehicles.” A road on which the movement of route vehicles, cyclists and vehicles used as passenger taxis is carried out along a specially designated lane towards the general flow of vehicles.

5.12 “End of the road with a lane for route vehicles.”

5.13.1, 5.13.2 “Entering a road with a lane for route vehicles.”

5.14 “Lane for route vehicles.” A lane intended for the movement only of route vehicles, cyclists and vehicles used as passenger taxis moving in the same direction as the general flow of vehicles.

5.14.2 “Lane for cyclists” - a lane of the roadway intended for the movement of bicycles and mopeds, separated from the rest of the roadway by horizontal markings and marked with sign 5.14.2.

5.15.1 “Traffic directions along lanes.”

The number of lanes and permitted directions of movement for each of them.

5.15.2 “Lane directions”.

Permitted lane directions.

Signs 5.15.1 and 5.15.2, which permit a left turn from the extreme left lane, also permit a U-turn from this lane.

Signs 5.15.1 and 5.15.2 do not apply to route vehicles. The effect of signs 5.15.1 and 5.15.2 installed in front of the intersection applies to the entire intersection, unless other signs 5.15.1 and 5.15.2 installed on it give other instructions.

5.15.3 “Start of stripe”.

The beginning of an additional uphill or braking lane. If the sign installed in front of the additional lane displays sign(s) 4.6 “Minimum speed limit,” then the driver of a vehicle who cannot continue driving along the main lane at the indicated or higher speed must change lanes to the lane located to his right.

5.15.4 “Start of stripe”.

The beginning of the middle section of a three-lane road intended for traffic in a given direction. If sign 5.15.4 shows a sign prohibiting the movement of any vehicles, then the movement of these vehicles in the corresponding lane is prohibited.

5.15.5 “End of lane”. The end of an additional uphill lane or acceleration lane.

5.15.6 “End of lane”.

The end of a section of the median on a three-lane road intended for traffic in a given direction.

If sign 5.15.7 shows a sign prohibiting the movement of any vehicles, then the movement of these vehicles in the corresponding lane is prohibited.
Signs 5.15.7 with the appropriate number of arrows can be used on roads with four or more lanes.

5.15.8 “Number of lanes”.

Indicates the number of lanes and lane modes. The driver is obliged to comply with the requirements of the signs marked on the arrows.

5.16 “Bus and (or) trolleybus stopping place.”

5.17 “Tram stopping place.”

5.18 “Taxi parking area.”

5.19.1, 5.19.2 “Pedestrian crossing”.

If there are no markings 1.14.1 or 1.14.2 at the crossing, sign 5.19.1 is installed to the right of the road on the near border of the crossing relative to approaching vehicles, and sign 5.19.2 is installed to the left of the road on the far border of the crossing.

5.20 “Artificial hump”.

Indicates the boundaries of an artificial roughness. The sign is installed at the nearest boundary of the artificial hump relative to approaching vehicles.

5.21 “Residential area”.

The territory in which the requirements of the Road Traffic Rules of the Russian Federation are in force, establishing the rules of traffic in a residential area.

5.22 “End of the residential area.”

5.23.1, 5.23.2 “Beginning of a populated area.”

The beginning of a populated area in which the requirements of the Road Traffic Rules of the Russian Federation are in force, establishing the procedure for traffic in populated areas.
5.24.1, 5.24.2 “End of a populated area.”

The place from which on a given road the requirements of the Road Traffic Rules of the Russian Federation, establishing the procedure for traffic in populated areas, cease to apply.

5.25 “The beginning of a settlement.”

The beginning of a populated area in which the requirements of the Road Traffic Rules of the Russian Federation, which establish traffic rules in populated areas, do not apply on this road.

5.26 “End of a settlement.”

The end of a populated area in which the requirements of the Road Traffic Regulations of the Russian Federation, which establish traffic rules in populated areas, do not apply on this road.

5.27 “Zone with limited parking.”

The place from which the territory (section of the road) begins where parking is prohibited.

5.28 “End of restricted parking zone.”

5.29 “Regulated parking zone.”

The place from which the territory (section of the road) begins, where parking is permitted and regulated with the help of signs and markings.

5.30 “End of regulated parking zone.”

5.31 “Zone with maximum speed limit.”

The place from which the territory (section of the road) begins where the maximum speed is limited.

5.32 “End of zone with maximum speed limit.”

5.33 “Pedestrian zone”.

The place from which the territory (section of the road) begins where only pedestrian traffic is allowed.

5.34 “End of the pedestrian zone.”

6. Information signs

Information signs inform about the location of populated areas and other objects, as well as established or recommended traffic modes.

6.1 “General maximum speed limits.”

General speed limits established by the Road Traffic Rules of the Russian Federation.

The speed at which it is recommended to drive on this section of the road. The sign's coverage area extends to the nearest intersection, and when sign 6.2 is used together with a warning sign, it is determined by the length of the dangerous area.

6.3.1 “Turning space.” Turning left is prohibited.

6.3.2 "Turning area". Length of the turning area. Turning left is prohibited.

6.4 “Parking location”.

6.5 "Emergency stop strip". Emergency stop strip on a steep descent.

6.6 “Underground pedestrian crossing.”

6.7 “Overground pedestrian crossing.”

6.8.1 - 6.8.3 "Deadlock". A road with no through passage.

6.9.1 "Advance directions"

6.9.2 "Advance direction indicator".

Directions to the settlements and other objects indicated on the sign. Signs may contain images of the sign 6.14.1 , highway, airport and other pictograms. Sign 6.9.1 may contain images of other signs informing about traffic patterns. At the bottom of sign 6.9.1, the distance from the place where the sign is installed to the intersection or the beginning of the deceleration lane is indicated.
Sign 6.9.1 is also used to indicate a detour around sections of roads on which one of the prohibition signs 3.11 - 3.15 is installed.

6.9.3 “Traffic pattern”.

The route of movement when certain maneuvers are prohibited at an intersection or permitted directions of movement at a complex intersection.

6.10.1 “Direction indicator”

6.10.2 “Direction indicator”.

Driving directions to route points. The signs may indicate the distance (km) to the objects indicated on them, as well as symbols of a highway, airport and other pictograms.

6.11 “Name of the object.”

The name of an object other than a populated area (river, lake, pass, landmark, etc.).

6.12 “Distance indicator”.

Distance (km) to settlements located along the route.

6.13 “Kilometer sign”. Distance (km) to the beginning or end of the road.

6.14.1, 6.14.2 “Route number”.

6.14.1 - number assigned to the road (route); 6.14.2 - number and direction of the road (route).

6.15.1 - 6.15.3 "Traffic direction for trucks."

6.16 "Stop line".

The place where vehicles stop when there is a prohibiting traffic light signal (traffic controller).

6.17 “Detour diagram”. Route to bypass a section of road temporarily closed to traffic.

Direction to bypass a section of road temporarily closed to traffic.

6.19.1, 6.19.2 “Preliminary indicator for changing lanes onto another roadway.”

The direction to bypass a section of the roadway closed to traffic on a road with a dividing strip or the direction of movement to return to the right roadway.

On signs 6.9.1, 6.9.2, 6.10.1 and 6.10.2 installed outside a populated area, a green or blue background means that traffic to the specified populated area or object will be carried out, respectively, along a motorway or other road. On signs 6.9.1, 6.9.2, 6.10.1 and 6.10.2 installed in a populated area, inserts with a green or blue background mean that movement to the specified populated area or object after leaving this populated area will be carried out accordingly according to motorway or other road; The white background of the sign means that the specified object is located in this locality.

7. Service marks

Service signs inform about the location of the relevant facilities.

7.1 “Medical aid station”.

7.2 "Hospital".

7.3 "Gas station".

7.4 “Car maintenance”.

7.5 "Car wash".

7.6 "Telephone".

7.7 “Food station”.

7.8 "Drinking water".

7.9 “Hotel or motel.”

7.10 "Camping".

7.11 "Resting Place."

7.12 “Road patrol post.”

7.13 "Police".

7.14 “International road transport control point.”

7.15 “Reception area of ​​a radio station transmitting traffic information.”

A section of road where radio station broadcasts are received at the frequency indicated on the sign.