Glass furniture fittings are a rather complex structure. Installing it requires skill, care and special tools. Since glass is a fairly fragile material, it is very easy to damage it simply through careless handling or awkward movement. Making a new piece of furniture from this material is quite expensive.

How to choose accessories for glass, its varieties

Fittings for glass furniture should be of the highest quality and have some specific properties. Because otherwise there is a high probability of breakdown. You should also pay maximum attention to the material from which the element is made - the choice of a specific one depends on the operating conditions.

Material for use in wet areas

Fittings for glass furniture located in the living room are always operated at relatively low humidity. Therefore, the likelihood of corrosion is minimal. Otherwise, if you need mechanisms for installation in the bathroom (doors, mirrors, shelves, etc.), you should pay attention to fittings made of stainless steel or other material that is not subject to oxidation under high humidity.

This point is very important, since rusty surfaces will not add aesthetics to the room or the furniture itself. You should also find out from your sales consultant what maximum load a particular set of fittings can withstand. In some cases, the weight of any piece of furniture can be very large.

What to look for when choosing

You should know that all fittings for glass and glass showcases are divided into two categories according to the type of fastening:

• adhesive;
• drillable.

The easiest way to install the fittings is that they are attached with a special glue and secured with screws. It does not require any special skills from the assembler, and the likelihood of damaging the glass sheet in this case is minimal.

There is one very important nuance regarding the use of these mechanisms - such kits cannot be used for elements whose weight is more than 20-25 kg. If the weight of a door or other item that requires fittings exceeds this limit, it is best to opt for bolt-on mechanisms.

The use of fittings that require drilling makes it possible to easily support the weight of furniture elements of several tens of kilograms or even more. But when installing this type of mechanism, you should be as careful as possible. Drilling glass should be carried out using a special drill, and also taking into account the characteristics of this material.

Most often, fittings of this type are made of metal, but are equipped with special rubber or silicone gaskets. Thus, direct contact between the glass and the surface of the fittings is minimized. There are many varieties of elements of this type.

Installation of glass fittings

Fittings for glass tables, doors and other similar items must be installed with great care. If there are no special skills in this matter, then it is best to entrust it to a professional. To perform this operation you will need a tool, as well as other items. The list of them depends on the type of mounted fittings.

Included in the set necessary tools include:

• screwdrivers (phillips and slotted);
• hexagons;
• drill;
• a set of drills for wood, metal, reinforced concrete;
• dowels;
• special glue.

Items such as hexagons and screwdrivers are necessary in order to disassemble the mechanism into its component parts before installation. Of course, a drill and drill bits are necessary for drilling.

If fittings for glass doors are installed, you will need to secure the hinges to the door frame. This must be done using sufficiently long dowels. If it is necessary to install mechanisms for lightweight glass sheets and drilling is not required, glue is used to connect the fittings and the glass sheet.

One very important thing to remember is important nuance when choosing glue. It must retain its transparency after drying. Especially if fittings for glass shelves are attached. Otherwise, the appearance of the furniture may be spoiled by the appearance of ugly dried glue.

Installation of fittings with glue

Fittings for glass cabinets, as well as other similar furniture and objects (doors, display cases) are most often attached with ordinary glue. In most cases, this process does not cause difficulties even for people who have never performed such operations. Installation of fittings on glass doors is carried out as follows:

• the floor or walls are marked (to secure the hinges);
• the door leaf is being tried on with the fittings not yet attached;

• fittings are being prepared;

• special glue is applied to the surface of the fittings at the fastening point and to the glass;
• using the included mechanisms present in the device or a clamp, it is necessary to firmly press the surface to be glued;
• After drying, the fittings are attached to the door frame.

It is very important to remember that when using a clamp or other similar devices you should be as careful as possible. Excessive force can simply lead to the appearance of a crack in the glass or even to its splitting into several parts. All operations must be performed with extreme caution.

Installation of fittings with drilling

Most often, fittings for glass display cases require drilling during installation, since the weight of such structures is quite large and the glue may simply not hold it. To perform this work you will need the following tools:

• drill with adjustable speed;
• special drills for glass;
• soft surface with a large area;
• a set of screwdrivers and hexagons for working with the mechanism.

Particular attention should be paid to the drill and drill set, since the success of the work being performed greatly depends on the quality of these items.

The drill must maintain a low enough rotation speed so as not to damage the glass or heat it.

• When picking up goods at your own expense, a 5% discount is provided (for a purchase amount of 20,000 rubles or more). - You can select and purchase equipment at the address: Balashikha, st. Sovetskaya 28.
• The cost of delivery in Moscow within the Moscow Ring Road is 800 rubles.
• The cost of delivery outside the Moscow Ring Road is from 1200 rubles.
• The cost of delivery to the Transport Company terminal in Moscow is 800 rubles (choice of transport company at the discretion of the buyer)
• Cost of delivery to the terminal of the Transport Company "PEK" and " Business Line"in Moscow -500 rub.
• Customers whose order amount is RUB 30,000 can take advantage of free delivery. and above, the delivery address is within the Moscow Ring Road (except for large-sized orders). For more detailed information about the provision of services, please contact the company’s managers.
• Delivery is carried out from 10-00 to 18-00 on weekdays and from 10-00 to 16-00 on Saturday. Delivery is not available on Sunday.
• The terms, time and address of delivery are agreed upon with the client.
• Shipment to the regions is carried out by a transport company chosen by the client. In this case, it is necessary to indicate: a) contact details of the person indicated by the recipient of the cargo (passport details, telephone number); b) destination; c) delivery method - RAILWAY, AIR, AUTO.

note

• Unloading and lifting of goods is not included in the delivery cost; delivery is carried out to the entrance.
• Delivery to addresses where “no stopping” and “no parking” signs are in effect is limited to the vehicle parking time - 5 minutes. The customer is obliged to ensure unloading within 5 minutes, or organize unloading at the location closest to the destination with valid parking or parking permits. If unloading does not begin within the specified period of time, the vehicle leaves with the cargo. In this situation, delivery fees are not refundable. The buyer will be able to pick up the order from the warehouse themselves or pay for delivery again.
• We do not guarantee the availability of all products displayed in our warehouse. Online store. Please check with the manager when agreeing on the order that the selected product is available in the quantity you require.
• We do not guarantee full compliance of the parameters and descriptions of goods indicated in the online store with the actual parameters for these goods.
• In view of various options lighting and monitor settings, we do not guarantee exact correspondence of images in color, size, texture and appearance goods. Information about the goods selected when ordering is subject to clarification from the manager when agreeing on the order.

Payment:

You can pay for the goods in cash to the courier upon delivery of the goods, in cash or by bank card at the company office. Non-cash payment is made to the company's bank account based on the issued invoice. Upon receipt of goods paid for non-cash payments, the client must have a Power of Attorney or Seal of the organization. In case of absence, the goods will not be issued, the delivery cost (if any) will not be refunded.

It would be impossible to assemble a glass display case or glass furniture without special connectors. were Special connectors are one of the most important elements of glass structures. When choosing a product, our customers pay important attention to its quality. When creating the catalogue, we pay attention to this indicator Special attention, along with affordability. Connectors must be highly durable and at the same time easy to install. All these requirements are met by the products from our catalog. Installation work You can even do it yourself if the connectors allow it. If you intend to cope with such work without the help of a specialist, then you should choose fittings based on this principle. From us you can buy connectors that will ensure high reliability of the structure, which can withstand heavy loads. The assortment of our online store includes double connectors, which allow you to connect two glass panels to each other, as well as triple connectors, which allow you to connect three glass modules. Call the phone number on the website and our manager-consultants will provide you with professional advice on any issue of interest regarding fittings products.

Direct deliveries from China. Pickup from a warehouse in Moscow, delivery to all regions and cities of the Russian Federation.

/ Glass cubes

Glass cubes are retail store equipment super economy class. Due to its low price, maximum display area and mobility, this equipment is ideal for beginning entrepreneurs.

In the manufacture of glass cubes, 5 mm thick glass with a polished euro edge, chips for connection (Fig. 1) and a podium made of laminated chipboard are used. In some cases, such display cases can be installed directly on a table or counter.

Rice. 1

Rice. 2

› Online calculator for calculating the number of chips

The podium is made of 16 mm laminated chipboard with a 0.4 mm melamine edge; the color of the podium is determined by the availability of material in the warehouse and may differ from that shown in the photograph.

Showcases are standardly supplied unassembled in original packaging - corrugated cardboard. When shipped via transport company glass parts are additionally packed in a wooden box.

Showcase production time - 10 working days.

Convenience this equipment The idea is that you can build a pile of cubes to fit the size of your retail space and, if necessary, add to it as much as you want.

Below are examples of several types of showcases with prices and the procedure for calculating the display case according to your desire.

1. Types of showcases 1-5, 2-3, 2-5 (the first number means the number of cells in width, the second - in height)

2. The procedure for calculating the price of a display case of any complexity made of glass parts of standard sizes.

We select right size one glass square:

Glass with edge grinding 5mm - 250mm x 250mm - 85 rub.
Glass with edge grinding 5mm - 250mm x 300mm - 100 rub.
Glass with edge grinding 5mm - 250mm x 400mm - 125 rub.
Glass with edge grinding 5mm - 300mm x 300mm - 140 rub.
Glass with edge grinding 5mm - 300mm x 400mm - 155 rub.
Glass with edge grinding 5mm - 400mm x 400mm - 175 rub.
Glass with edge grinding 5mm - 500mm x 500mm - 250 rub.

Are we supplied with chips for fastening? not forgetting to take into account that for each chip in the display case you need to add 10 mm.

Chip for assembling cubes - 10 rub.

We add a podium under the showcase - its height is standard 100 mm, and the size is calculated as follows:
Depth = glass square size +20 mm
Length = size of glass square x number of chips + number of chips x 10 mm + 32 mm.
Podium made of laminated chipboard - 300 rub. / base 1 cube wide

VOILA!!! YOUR SHOWSHOW.

If for some reason you are not satisfied with our standards, please contact us and we will make this type of commercial equipment according to your sketches. In this case, the production period will remain the same 10 working days from the date of approval of the design.

You can order products by contacting the manager by phone - fax or by sending a request to email indicated in the contacts section

Glass cubes

In the field of trade, the use of glass cube designs is widespread - such commercial equipment can be used both for the sale of automobile spare parts and for the sale of expensive perfume. Such a display case is mobile, all its elements can be easily and quickly replaced, and the design features and the minimum amount of necessary fittings allow for maximum visibility of goods. Also, glass cubes allow you to independently plan retail space, I place the desired structure in the right place - there is no need to fix the podium in the floor. Along with all the advantages, a fairly significant argument in favor of glass cubes is their low cost and fast delivery times.