Clay necklace. Polymer clay necklace: jewelry with beautiful flowers. Polymer clay beads

The ability to make a necklace with your own hands is always a creative, interesting and very exciting process. Such decoration will emphasize the individuality of its owner much more than something bought in a store. Girls and women of many generations were engaged in needlework. However, today even new items can be used to create a wide variety of jewelry. technical progress. A material called “polymer clay” is increasingly being used for decorative elements, including jewelry. In this article we will look at what it is and how to make a necklace from it.

Polymer clay

This substance is similar to the clay that everyone is used to seeing, and some are used to using. It is sold in craft stores in different colors. Anything can be molded from it.

After sculpting, the resulting product is baked in an oven. Usually it is enough to hold it for 20 to 25 minutes at a temperature of 110 degrees. But on each package, manufacturers write precise instructions that should be followed. They may be slightly different from each other.

After heat treatment, the product hardens, does not stick to your hands, does not stain anything and no longer changes shape. Very often, jewelry is made from polymer clay. Here the field for imagination is limitless.

Miracles made of polymer clay

Such a handmade necklace can imitate, for example, natural stones, beads or bones. In addition to the shape, various color solutions are possible with polymer clay. Moreover, you can use either the finished color of the material or add various shades, halftones, tints, etc. To create the required color, paints specially designed for working with clay are used. However, many needlewomen use ordinary oil paints, acrylic and others. Even eye shadow sometimes enters the creation process. And plastic polymer clay tolerates all this easily, acquiring the desired shade. Below we will look at an example of how one beautiful necklace is created, the diagrams for which will be useful in the future when making roses.

What is needed for work

For the necklace you will need the following supplies and tools:

Polymer clay in 3 colors (white, brown and beige).
Liquid polymer clay, with a brush.
A stack with a ball at the end.
Acrylic rolling pin.
Needle.
Special blade.
Cutter (flower-shaped).
Rondels and beads.
Fishing line.
Extension cord and lock.
Pins.
The wire is no more than 1.5 millimeters in diameter.
Scissors.
Round nose pliers.
The glue is quick-drying.

Having prepared all the materials, you can start working.

Master class: DIY necklace

Clay of brown and beige shades is taken. Triangles are formed from both pieces and connected to form a rectangle. In this case, beige is taken twice as much as brown. The clay is rolled out with an acrylic rolling pin, folding the layer in half each time. Gradually it will become more and more smooth transition from one color to another.

Having received the desired shade, the oval layer is cut transversely into many strips of approximately the same width (from 2 to 4 centimeters). After this, the strips are stacked. In this case, the second plate is placed a centimeter forward, and the third one a centimeter back, and then in the desired order.

The ends of the resulting stack are cut to give an even shape. The most convenient way to do this is with a special blade. Using your hands, carefully form a cylinder from the stack. Then it is cut into small plates with a blade. Petals will form from them. Moreover, the thinner the plate, the smaller the diameter the future petal will receive. The sections are stretched and thinned first with the fingers. Then, using a wavy blade, you can get the jagged edges of the future petal. And after that, placing it on the palm of your hand, they pull it out with the help of a stack, giving the desired indentation.

First, the bottom row of five pieces is formed. The beige color should be at the tip of the petal, and the brown color should be at its base. The remaining rows form an overlap.

Our handmade necklace will consist of five roses: three large and two smaller. The center of the flowers is coated with plastic. Then, having formed several white balls from clay with a diameter of 3 to 5 millimeters, pour them directly into the core.

Necklace assembly

On a wire, on one side of which a loop is made using pliers, alternately prepared beads, rondels, then roses and again beads with rondels are strung. After this, the ends are fixed. To be on the safe side, you can also soak the desired area with glue. A pin with a head is inserted on one side and the other, the remaining rod is pulled out with round nose pliers and the loop is twisted.

In addition, it is advisable to additionally secure the flowers with a satin ribbon. The loops from the threads are connected to the loops of the wire frame. At the end of the work, attach a lock with an extension.

That's it, a necklace of beads and roses made from polymer clay, ready.

IN Lately products self made- this is a whole philosophy and lifestyle. A special, interesting and kind, creative world.

That is why we created this site - the way all fans of handicrafts need it. A whole City, where every artisan or buyer of original products can find everything interesting for themselves.

Kraftburg is both an online handicraft store and a place on the Internet where you can find creative ideas, materials for creativity, master classes from experienced authors, where you can find everything interesting information about needlework and design art. Here you can get inspiration and create your own style, buy gifts and souvenirs and just enjoy the beauty!

But first things first.

Unique catalogue. Gifts, souvenirs, handmade items - in person and by mail

Our catalog is built in such a way as to accommodate as many designer products as possible of completely different styles and purposes. No other craft store will provide such an impressive selection. After all, with us, each author registers his own store, and there can be as many storefronts as creative personalities wants to offer you his unique product.

* This resource is an ideal place for those who buy original gifts “with soul”, always individual and “not like everyone else”.

* For those who strive to bring harmony and comfort to their home and are looking for something non-trivial and spectacular to decorate their home.

* For those who have their own style and are interested in finding their own designer to dress in exclusive clothes.

* For those who take care of themselves and allow themselves to use only natural cosmetics and perfume.

* For those who want to easily, quickly and unusually decorate their holiday.

* For connoisseurs artistic creativity, including folk applied art.

Please yourself and your loved ones with truly valuable and beautiful things.

Possibility of individual orders

The site is aimed at active buyers. If you liked one of the handicraft stores we presented, the author, his style, his work, you can contact him through a special form and keep in touch. Make an individual order, offer ongoing cooperation. Finally realize your incredible ideas by the hands of a true master.

You can shop and place orders remotely, just like in any online store.

For authors: an opportunity for self-realization and creative growth!

Creating beautiful things certainly brings joy. But if you want this activity to also generate income, hurry up to register your store on the site. Many RuNet users will know about you and your work! But that's not all...

* We regularly publish new interesting materials, articles, presentations about handicrafts and design.

* Do you want to master a new type of creativity or improve yours by creating things that have not been done before? You can find with us a master class that interests you, created by a person with experience and moderated. With a clear and detailed description of the process.

* You can find acquaintances, colleagues, fans of your work, and perhaps co-authors, share ideas, and gain inspiration.

* We will keep you updated on news and upcoming events in the world of handicrafts.

* You can make your personal profile your online presentation telling about you and your work.

* Create and offer your own master classes to other handicraftsmen, demonstrate your work.

In a word, Kraftburg is a place that is valued by buyers and authors of works, a platform for creativity and about creativity.

Master class on happiness

Handmade is life. And even the purchase of one thing can radically change not only your external, but also your internal world. Or maybe it will encourage you to create something with your own hands.

After all, this is the only way to convey your thoughts, feelings, your view of the world. With strokes, paints, knots, threads. Despite the fact that each combination of materials, patterns, volumes and images is unique! You can never repeat a masterpiece one to one.

And even if you take a specific master class on the site, open it and repeat step by step, stroke by stroke, everything the way the master does it, you still won’t get exactly the same thing! But this is not “alas”, but “fortunately”. Because this is the main magic of creativity: even the author himself does not always know what will happen as a result of his work. Unlike factory “stamping”, his things begin to live their own life, tell their own story.

In a room they create a feeling of the presence of something good.

In life - a feeling of meaningfulness, spirituality.

If your work “hooked” someone, stopped someone’s gaze, made them think or dream, then it was not done in vain.

If you have found your dream, created by someone’s magical hands, then it’s not in vain that you came to this site.

Today I will tell you about my method of creating lush, voluminous roses, on the basis of which you can create such a chic necklace.

For work we will need Fimo polymer clay in soft pink, fuchsia and grassy shades. We also need: blades; acrylic rolling pin or pasta machine; stack with needles; stack with a flat platform; stack with a ball; cutters are round in shape, but of different diameters (I use end caps); wire with a diameter of 1.5 mm; wire with a diameter of 0.6 mm; beads; quick-drying glue; green satin ribbon and various tools for assembly.

Let's start by creating flowers. To do this, we will prepare 3 layers of polymer clay: pink, fuchsia and a mixture of two colors: pink and fuchsia. Roll out the layers to a thickness of 1 mm.

Cover the plates with cling film and use a cutter of a larger diameter to cut out circles.

We form a petal from each circle. Using our hands, we give the mug the shape of a drop, then we place it on the palm of our left hand and, using a stack with a ball, using wave-like movements, we form a thin edge of the future petal.

After this, we detach the petal from the hand, place it in the palm again and modify it with a round stack in the center of the circle so that the petal takes the shape of a boat.

We form a small droplet from fuchsia-colored polymer clay. This is the core of our flower. We attach 3 petals of the same color around it. The petals overlap each other. We slightly spread the tips of the petals with our fingers to create a half-opened bud.

We make the next tier of petals from material mixed using clay of 2 colors: pink and fuchsia. In the same way, we overlap the petals, revealing their edges.

The last, 4th row of petals remains. Important: here we attach the petals differently! The petals should be open; they do not go around the bud, so we overlap them with the convex side facing the bud. For this row you need 5-6 of them. Using our fingers, we continue to form an uneven, slightly curved edge and a slight, natural waviness.

A tail has formed on the back side of the flower - the remainder of the plastic. We cut it off with a blade or scissors. We also pierce a through hole for attaching the flower. It can be made in a stack before trimming the tail or after: whichever is more convenient for you. Important: the hole must match the diameter of the wire on which we will later assemble the elements! In my case - 1.5 mm.

For the necklace we will need small, half-opened buds. We make petals for them. To do this, we again take 3 plates of different shades. Using a cutter of a smaller diameter and cling film, we cut out circles and, in the same way as we formed large petals, we make blanks for the future flower. For one small bud you will need 3 fuchsia petals, 3 mixed petals and 5 pink petals.

For the necklace you need 3 large flowers and 12 unopened buds. We make them using the already familiar technology, attaching tiers of petals to a drop-shaped core. We finish the small bud with a layer of pink petals, which, unlike the large flower, overlap the bud. Don't forget to shape the edge of the petals, giving it a natural look.

In small buds it is more convenient to cut off the tail from the remaining clay after the through hole has already been made. It's time to put the flowers and buds in the oven for firing.

While the flowers are being fired, we create the leaves. To do this, take 2 small squares of green and pink polymer clay, approximately 0.5 cm thick. For the pink color, we need the most delicate shade, which was used to create the upper tier of petals. Using a blade, we cut the squares diagonally, stack the resulting triangles by color on top of each other and make them into a square again, but this time it’s two-colored.

Using a rolling pin or pasta machine, we make a color transition. To do this, roll out the square into stripes. Fold it in half and roll it out again. We repeat these 2 steps until we get a tape with a smooth color transition. Roll it out to the length we need.

We twist the resulting ribbon into a cane so that the pink color is on the inside and the green color is on the outside. We squeeze the resulting cane and roll it out to a diameter of 1 cm. We shape it with our fingers so that when cutting we get teardrop-shaped pieces.

Cut the cane into equal pieces. This is the basis for the future leaf. We give it a natural shape and apply veins with a sharp object. Using a scalpel, we trim the edges so that the leaf looks like a natural one. Use your hands to make the leaf slightly convex and pierce a through hole at its base. For the necklace you will need about 40 leaves.

To make the buds look more natural, add small leaves to their base. We cut our pink and green plastic cane into very thin pieces. We give them the shape of a leaf and use scissors to make small cuts along the edges for naturalness. For the 1st bud you will need 3 leaves. We attach them to the base of the flower and send the entire structure for secondary firing.

Now let's work on the frame. We cut 25-30 cm from wire with a diameter of 1.5 mm and plan the order of placement of the elements of the future necklace.

Using pliers, make a large loop on one side of the wire. Then we take a wire with a diameter of 0.6 mm, green or silver. We wind it in several turns onto the frame of our product near the loop.

Now we string leaves and beads onto this wire. We do it this way: we put the element on the wire, form a loop about 0.5 cm long and twist it. The leaves and beads are not close to the frame, but seem to be in a suspended state. We assemble the elements, adjusting the pomp and volume of the product.

We string the flower buds directly onto the wire frame from the reverse side, bend them with thin wire and make several turns around the frame to secure the flowers.

After assembling all the elements, we make a loop at one more end of the wire using round pliers. We wrap the entire frame with green satin ribbon, thereby masking the main wire and strengthening the entire product.

To fix it, soak the tape on the frame, especially its beginning and end, with droplets of quick-drying glue. We attach a row of beads to the loops at the ends of the frame, add carabiners for the clasp and our charming necklace is ready!

Any girl and woman loves to decorate herself with decorative elements and accessories. Many jewelry can be purchased in specialized stores or jewelry workshops. However, it is not always worth spending large sums of money in order to look attractive. A lot of original and unique decorative elements can be made independently at home with minimal financial costs. In our article we will tell you about various options for making a necklace from polymer clay with your own hands for craftswomen of any level.

http://site/uploads/posts/2016-10/1477063581_150604194436.jpeg

Polymer clay or thermal clay is an amazing learning material. creative process. Using plastic clay, you can form a variety of decorations, flowers, various souvenirs, refrigerator magnets, toys and even beautiful dolls. Products made from polymer clay have excellent properties that make work pleasant, fast and beautiful.

We can say that interacting with polymer clay is as easy as with children's plasticine. However, such beautiful things cannot be made from ordinary plasticine. Polymer clay can imitate natural materials, such as natural stones, poppies, wood, metal and even fabric. There is clay with “special effects” that greatly expands creative possibilities. For example, there are clays with pearl, metallic, granite, transparency and translucency effects, and so on.

If you have chosen polymer clay, which requires baking, then you should prepare your oven. Wash the oven thoroughly so that there are no foreign odors in it, then place parchment paper on a baking sheet, and then lay out your finished plastic clay products as in the photos presented. Set the appropriate temperature, which will be indicated on the clay packaging, and wait. As a result, if the product does not change color or foreign smell appears, then everything worked out for you.

Beads made of polymer clay: detailed master class with description

We offer you a small and detailed master class with a description of the process of making beautiful beads with your own hands from polymer clay. First you need to prepare all the material and tools:

Multi-colored polymer clay;
Working surface;
Ruler;
Wooden skewers;
Sharp knife;
Rolling pin or roller for working with clay;
Varnish for coating the finished product.

Begin the process of forming simple beads from polymer material with your own hands. First, take a small piece of plastic mass and form it into a small “sausage”. Then you should cut pieces of the same size from it and roll them into balls. Choose the size of the pieces based on your taste preferences and wishes. So, if you want to get large beads as a result of manipulation, you need to form a “sausage” with a wider diameter.

After forming identical and neat balls from polymer material, proceed to the next stage of making the necklace. Start making decorative designs on the beads. At the moment when the clay still retains its qualities of softness and plasticity, you can fix sequins, rhinestones and beads on the beads. At this moment, you should form various grooves, recesses and other decorative elements of your polymer clay product. Don't forget to make through holes in each clay bead. It is through this hole that you will thread the cord or fishing line for your necklace.

After you finish all the manipulations of decorating and designing your polymer clay beads, start processing the material. Place your balls in boiling water for about eight or ten minutes. Such manipulations must be carried out in order to give the clay a solid structure and maintain the original shine of the material.

Now you need to remove the beads from the water and leave them to dry completely on a clean paper surface. Once the polymer clay has completely hardened, you can begin the final assembly of your necklace. It is enough to take a fairly strong thread or fishing line and place all the beads made of polymer material on it. Your DIY polymer clay necklace is now complete!

Featured video for the article

To fully understand the process of making a necklace from a polymer material, we suggest watching a small selection of thematic videos for the article.

When working with polymer baked clay, there are various techniques, having studied which, you can create your own unique patterns and ornaments. But someone is guided by their own taste and experience, and this does not make the products and decorations worse or less interesting. This is exactly how the “Asia” necklace was “born”.

What you need to make a necklace:

Green polymer clay (packaging)
- a blade for working with clay or a stationery knife
- paste machine, you can use a rolling pin made of acrylic, glass or any other material without nicks or seams
- toothpicks or thin knitting needles
- acrylic paint metallic colors, napkins
- glossy varnish
- pins, connecting rings, bronze chain pieces, carabiner lock
- beads made of glass (acrylic, plastic, wood) of a suitable color

How to make a necklace from polymer clay

Making the Asia necklace begins with softening the clay. It’s difficult to mash the entire package at once, so I do it in parts. Having kneaded it well, I connect both parts and roll them into one bar.

I divide it visually into three parts. I only cut one. I will make round and oblong beads from them, so I put this part aside for now, and divide two-thirds of the bar into five parts - these are blanks for a necklace, two are larger, three are smaller.

I roll out each piece using a pasta machine or rolling pin.

I fold all the parts in half.

I form the blanks in the shape of a trapezoid. It turns out five pieces of different sizes: the central one, two side ones of the same size and the next side ones a little smaller.

Now we’ve reached the delayed piece of clay! I cut it into pieces with a blade, form two balls and flatten them - these are flat beads. A few pieces of sticks of different sizes, and just cut circles is all that is needed to decorate the necklace.

Now all the blanks need to be “planted” on toothpicks, then this will be more difficult to do when the ornament is applied to them. If you can make holes after baking, great! I don’t have this option yet, so I make holes with a toothpick.

To decorate each plate you will need a large number of thin flagella. It's better to cook more right away.

I'm starting to design the central plate. Having previously prepared the drawing on paper, I transfer it to clay using thin strands.

Between the strands of the main pattern I place rolled small balls. If toothpick marks remain on them, it’s not a problem, you’ll still have to pierce them later, but it’s better to work carefully.

I make shallow punctures throughout the entire pattern using a knitting needle, a toothpick and the round end of a hairpin. Special tools are designed for these procedures, of course, but in the absence of such, you can use improvised means.

Next, in the same way I design two plates that will be located next to the central one. They have a different pattern laid out on them, but the algorithm of actions is the same.

And the last plates, they are the smallest of all, I also decorate with a new ornament.

I decorate round and oblong beads with strands in the same way as the plates of a necklace, without removing them from toothpicks.

I simply pierce small round flat beads in the center with toothpicks and leave them to bake on them.

I put all the pieces in the oven for 15-20 minutes (I take out the smallest ones after 7 minutes). The temperature instructions have long been studied and followed by me unquestioningly, since I had a bitter experience of “disobedience and experimentation,” as a result of which the product was hopelessly spoiled, as was my mood, for that matter. So I advise you to follow the instructions.

After the blanks for the future decoration have undergone heat treatment, they must cool. And only then acrylic golden paint is applied to them. I do this not with a brush, but with my fingers. This way it’s more convenient to paint only the convex parts of the pattern, but the brush will paint all the parts, which is not included in my plans. After the paint has dried, I apply a gloss varnish.

I arrange the pieces in a certain order. I secure the beads and plates using fittings.

The original necklace is ready and waiting for its owner!

Quote from Marrietta DIY polymer clay necklace - master class

Master class: polymer clay necklace in 15 minutes

Today I will tell you about my method of creating lush, voluminous roses, on the basis of which you can create such a chic necklace.

Let's start by creating flowers. To do this, we will prepare 3 layers of polymer clay: pink, fuchsia and a mixture of two colors: pink and fuchsia. Roll out the layers to a thickness of 1 mm.

Cover the plates with cling film and use a cutter of a larger diameter to cut out circles.

After this, we detach the petal from the hand, place it in the palm again and modify it with a round stack in the center of the circle so that the petal takes the shape of a boat.

We make the next tier of petals from material mixed using clay of 2 colors: pink and fuchsia. In the same way, we overlap the petals, revealing their edges.

In small buds it is more convenient to cut off the tail from the remaining clay after the through hole has already been made. It's time to put the flowers and buds in the oven for firing.

Now let's work on the frame. We cut 25-30 cm from wire with a diameter of 1.5 mm and plan the order of placement of the elements of the future necklace.

Using pliers, make a large loop on one side of the wire. Then we take a wire with a diameter of 0.6 mm, green or silver. We wind it in several turns onto the frame of our product near the loop.

We string the flower buds directly onto the wire frame from the reverse side, bend them with thin wire and make several turns around the frame to secure the flowers.

Watch MK on video:

The ability to make a necklace with your own hands is always a creative, interesting and very exciting process. Such decoration will emphasize the individuality of its owner much more than something bought in a store. Girls and women of many generations were engaged in needlework. However, today even the latest technological advances can be used to create a wide variety of jewelry. A material called “polymer clay” is increasingly being used for decorative elements, including jewelry. In this article we will look at what it is and how to make a necklace from it.

Polymer clay

This substance is similar to the clay that everyone is used to seeing, and some are used to using. It is sold in craft stores in different colors. Anything can be molded from it.

Miracles made of polymer clay

What is needed for work

For the necklace you will need the following supplies and tools:

Polymer clay in 3 colors (white, brown and beige).
Liquid polymer clay, with a brush.
A stack with a ball at the end.
Acrylic rolling pin.
Needle.
Special blade.
Cutter (flower-shaped).
Rondels and beads.
Fishing line.
Extension cord and lock.
Pins.
The wire is no more than 1.5 millimeters in diameter.
Scissors.
Round nose pliers.
The glue is quick-drying.

Having prepared all the materials, you can start working.

Master class: DIY necklace

Clay of brown and beige shades is taken. Triangles are formed from both pieces and connected to form a rectangle. In this case, beige is taken twice as much as brown. The clay is rolled out with an acrylic rolling pin, folding the layer in half each time. Gradually, you will get an increasingly smooth transition from one color to another.

First, the bottom row of five pieces is formed. The beige color should be at the tip of the petal, and the brown color should be at its base. The remaining rows form an overlap.

Necklace assembly

That's all, and the roses made from polymer clay are ready.

We continue to fill the box with designer jewelry created in a single copy.

In this master class, we invite you to make another necklace from polymer clay with your own hands. Despite its massiveness, it looks graceful and delicate. This necklace is ideal for a plump lady - large accessories visually make the neck thinner. The decoration will also suit slender girls; it is especially good to wear it in the warm season, catching the admiring glances of passers-by.

Materials for a beginner jeweler

To make a necklace from polymer clay you will need the following materials:

thermoplastic of white, blue, pink and green colors, as well as remnants of different shades;
rolling roller;
modeling tools;
thin knitting needle;
large saucer;
circle cutting molds;
special plastic knife or stationery blades;
beads for necklaces;
accessories for assembling jewelry;
glass rhinestones with a diameter of 3-4 mm. You can use hot glue.

Step-by-step instructions for sculpting

The apple tree branch will be positioned against the blue sky. You can simplify the task and prepare a plain blue background. But a product with a gradient – a gradual transition of color – looks more interesting. To get a transition from dark blue to light blue, form right triangles from the blue and white mass and fold them into a rectangle.

Cut the rectangle into several equal parts.

Mix each part well and place in a new rectangle.

Roll out the resulting mass with a roller or a pasta machine into a thin layer.

First, roll along the tone boundaries, folding the layer in half several times until the boundaries lose their sharpness.

Then roll the plastic across the tone transition so that it turns into a long narrow strip.

Fold this strip like an accordion, bending it every 3-4 cm.

Press well so that all layers are connected, align the sides. You should end up with a block with a color transition.

Cut off part of the block and roll it into a layer measuring approximately 8 by 10 cm and 1-2 mm thick. From the remains, prepare a layer for the base of the same size, but thicker - 3-4 mm.

Using cutters or a prepared template, cut out the shape of the central part of the flower necklace from polymer clay. Immediately make holes for the fittings.

Further work can be continued by placing the workpiece on a sheet of paper or placing it on the surface of the saucer from the back side. The second option will give the product a bend, thanks to which the necklace will fit perfectly to the body.

From the leftovers, mix a small piece of dark brown color. Roll sausages out of it, form twigs and place them on the base, smoothing them with a knitting needle or modeling tool.

Cut leaves from the finished cane 4-6 mm thick. How to make a cane for leaves and petals is described.

Using a knitting needle, press each leaf at the base to the surface, and then add texture with a thin tool, creating veins and irregularities. Distribute the leaves evenly throughout the branch.

Cut petals 3-4 mm in size from the pink cane. Try to cut as thin as possible.

Using a modeling tool with a smooth spherical end, shape a thermoplastic flower by flattening the petals into a concave shape. Try to ensure that they are well connected to the surface of the base.

Make a depression in the center of the flower and insert a rhinestone into it. It is convenient to use thermo-adhesive rhinestones, since when baked the adhesive layer will melt and firmly glue the rhinestone to the base. If you are using regular glass rhinestones, try to press it deeper and press it well with plastic around the circumference so that it is securely fastened and does not get lost in the future.

Similarly, form a few more flowers and a couple of buds for variety.

Bake the workpiece according to the thermoplastic manufacturer's instructions. Additional information for baking. When the product has cooled, assemble the necklace using fittings and beads.

A master class on sculpting an original necklace from polymer clay was prepared especially for readers of the online magazine “Women’s Hobbies”.

If you still have room in your box, make and others. Or maybe it's time to do it?

Thick and beautiful bunches of lilacs lure us with their appearance and sweet aroma, as a true symbol of the coming spring and warmth, they fascinate us and force us to admire them! Lilac not only carries beauty, but is also a symbol of love, recognition and sincerity of feelings.

In this lesson, I want to introduce you to the creation of bunches of lilacs from polymer clay and their design into a beautiful feminine necklace, with an original assembly and amazing design. The lesson in terms of modeling is simple, but requires perseverance and patience, but in terms of assembly, it requires certain skills and abilities. If you are ready to spend two or three days making an unusual decoration, then be patient, we are getting started...

Materials and tools needed for sculpting:

1. Polymer clay in purple, light purple, yellow and green;
2. Blade or stationery knife;
3. Rolling pin or pasta machine;
4. Mold with imitation of leaf veins;
5. Needles or toothpick;
6. Memory wire for necklace;
7. Wire with a diameter of 0.3-0.4 mm and wire with a diameter of 1.0 -1.2 mm;
8. Green floral ribbon;
9. Stack with a ball;
10. Beads in two shades of purple and light purple;
11. Manicure scissors, nippers, round nose pliers;
12. Needle and fishing line;
13. Quick-drying glue.

So, let's start sculpting:

1. First you need to prepare a thin wire with a diameter of 0.3-0.4 mm. Measure pieces of wire 4-5 cm long and use pliers to make a loop on one side of each wire.

2. To create lilac buds and flowers, you will need to take two shades of clay, for example, violet and lilac, or lilac and lilac, shades that differ from each other by one or two tones.

3. Now we form a small droplet from purple polymer clay and cut it with a blade into four equal parts from the wide and rounded side of the droplet.

4. Using a stack with a ball or a toothpick, we roll and thin each of the cut parts and give them the shape of petals.

5. We pierce the center of the flower with a wire base with a loop so that the loop fits tightly into the plastic and is half hidden in it.

6. To create buds, you need to make smaller droplets than you did for the flowers and also cut them into four equal parts; it is better to cut the buds with nail scissors, then the bud will have an elongated shape.

7. Open the bud, thread it through with a wire piece with a loop and close the bud again.

8. I can’t say the exact number of required flower and bud blanks, but I can say that it is at least 200 pieces.

9. Form a small ball from yellow polymer clay, which will become the core of the flower, and place it in the recess exactly in the center of the flower, make notches on the surface of the ball, emanating from one point exactly in the center.

10. In the same way, make a core in all the open flower blanks. Place the buds and flowers for firing in the oven, observing the baking temperature and time according to the instructions.

11. After firing at the base of the buds and flowers, you need to wrap green floral tape in two or three layers.

13. After 4-5 buds, you need to supplement the branch with open flowers of different shades. The branch should have 4-5 buds and 5-7 open flowers.

14. For a large cluster you need to collect at least 5-6 of these inflorescences.

16. In addition to clusters of flowers, you need to dilute the lilac with large leaves. Roll out a layer of green clay 5 mm thick using a pasta machine, and cut out oval leaves in a random order with a blade.

17. Place a sheet of green clay on the surface of the mold, with the texture of the veins of the petal, and press down the plastic so that the texture of the veins is imprinted on the surface of the clay.

18. You need to create six leaves, different in size.

19. In each leaf, make a depression at the base with the edge of a needle or toothpick exactly along the central vein.

20. Take a wire with a diameter of 0.5-0.6 mm and a length of 5 cm, and make an elongated flat loop on one side of the wire.

21. Hide the elongated flat loop in the recess of the leaf and press it with plastic on both sides so that the wire is completely hidden in the layers of clay. After this, place the leaves in the oven for firing.

22. After firing, you need to wrap several turns of green floral tape at the base of the leaves.

23. Add leaves to the lilac bunch. Since we will have a necklace, it means we need to collect two bunches, they can be different in size and volume.

24. In order for the necklace to stay firmly and securely on the neck, you need to take a couple of turns of memory wire under the necklace and secure its ends to the “tails” of lilac clusters.

25. To ensure reliability of the structure (the base of the necklace), you need to take a wire with a diameter of 1.0-1.2 mm and wrap it in two layers around the memory wire and the “tails” of the lilac bunches.

26. Now you need to wrap the entire wire frame in three or four layers with floral tape of the green layer.

27. The base of the necklace looks empty, so I suggest decorating it with beads. Take beads of two shades: lilac and purple and string them in random order onto a fishing line 1 meter long.

28. Now we go back in the opposite direction: take one bead of any of the two shades and pass one bead and pass the needle through the hole of the next bead. Thus, we make a simple strand of beads, which will have an arbitrary winding shape.

29. Sew a zigzag strand of beads to the floral ribbon using a needle and fishing line, evenly winding the strand over the entire base.

The necklace with bunches of lilacs is ready! Such decoration will not only lift your spring mood, but will also bring freshness and tenderness to your look!