In order to make some item in gameEVE online you will need the following components:

1. Drawing
2. Materials needed for production. They will be indicated in the drawing.
3. The production line with which the new facility will be built.

Blueprint (BP)

All drawings for production inEVE ironed like the objects that will be obtained as a result of them. They are depicted on a blue background.

The VR parameters are as follows:

1. Material efficiency level(ME) is the level of BP research on the degree of production efficiency. The higher this indicator is, the less waste will be generated during the production process.
2. Waste factor– this is the level of waste. It is directly related to ME. The formula for calculating Wasage factor is as follows:

Waste factor = Base Waste Factor / (1 + ME).

If your Me is negative, then your formula will look like this:

Waste factor = Base Waste Factor * (1 - ME).

Base Waste Factor in this case is the waste level for BP with ME equal to zero. For the bulk of the population, BP is equal to 10 percent.

The result is that zero-ME BP research cuts waste in half. But do not forget that the higher the level of IU, the less effect will be obtained during the next VR study. This coma set a limit, after which the further research process would have no meaning. For example, in order to produce any item you need 23 zydrine. If we divide this number by five, the result is the number of ME, which is necessary to ensure that there is no waste from zydrine during the production of the item.

If you look at the information on the required materials for production inEVE you can see two rows of numbers:

1. The number of components that are needed to produce with your own skills.
2. The number of components that will be needed to produce the 5 lvl Production Efficiency skill.

Each level of such a skill as Production Efficiency reduces the amount necessary materials for construction at 4 percent. If the Production Efficiency skill is missing, you will need 120% of the materials from the Perfect column. If you have 5 lvl Production Efficiency skill, you will only need the amount of minerals that will be indicated in the BP, that is, 100 percent. As a result, this skill is the first thing that should be upgraded to the fifth lev of a production worker.

1. Productivity efficiency level(PE) is the level of research of the drawing for the speed of the production process. The greater your RE, the less time it will take to produce the thing. But researching PE above ten makes virtually no sense.

VR can be divided into the following criteria:

1. According to the type of VR there is a copy and an original
2. According to the type of manufactured products, VR can be Storyline, T1, T2.

BPO (Blueprint original) is the original drawing. You can do the following with it:

- research. Due to which the level of PE and IU increases

- Copy. As a result of copying, a VRS is formed

- Manufacturer

BPC (Blueprint copy)- this is a copy of the drawing that appears against the background of copying the VRO; the VRS has the same parameters as PE and ME, as well as the original VRO. Do not forget that the VRS is designed for a certain amount of items. After the specified volume of items has been manufactured, the VRS will simply disappear. In addition to the production industry, VRS can be used as an inventory.

Drawing a conclusion from all of the above, we can say that the VRS is able to perform actions of the following nature:

1. Produce.
2. Invent

In order to engage in research on PE, ME, inventory, copying, you must have a laboratory at your location. In order to establish production, a production line must be available.

T1 BPO the most common VRO in the game. You can buy them in unlimited quantities from some LDCs in the market. This kind of VRO always has PE and ME equal to zero. The newly purchased VRO can be put up for sale in the market again. But after you apply any VRO action to it, it will no longer be possible to sell it via the Internet. Researched VROs can only be purchased from another player using contract systems. Basically, there is no need to use any skills to produce, research and copy T1 BPO. Usually it will be enough to have one skill - 1 lvl.

T2 BPC— today the bulk of such HRV is obtained as a result of the inventory. Distinctive feature T2 BPC are negative levels of ME as well as PE. And this seriously affects financial side question. But due to the limited volume of T2 BPO, these BPCs are in high demand.

Storyline, as well as factional BPCs.

Storyline can be obtained mainly as a reward for completing storyline missions. It is also possible to obtain fractional BP in the LP store. Storyline HRVs are not entirely successful HRVs, because in order to start production you must have certain skills. In some cases, special materials may be needed. At the same time, the resulting objects very often do not have any special characteristics.

All the skills that are necessary for the production, research and copying of any VR are written in the drawing itself.

General list of skills that affect copying, production and research:

Science - increases the speed of copying drawings per level by five percent

Research – increases the speed of researching drawings on PE by five percent

Metallurgy increases the research speed on ME blueprints by five percent.

Laboratory Operation – increases the maximum number of simultaneously used laboratory slots for each skill level.

Advanced Laboratory Operation– is also able to increase the number of laboratory slots used. As a result, you can have Advanced Laboratory Operation 4 lvl and Laboratory Operation 5 lvl. You can use 10 laboratory slots at the same time.

Scientific Networking– makes it possible to use the laboratory from a distance. If you do not have this skill, then you can start copying, inventory and research only while on the territory of the laboratory itself. If you are using a laboratory station, your VRO must be located within the station.

After the research is completed, the VRO will be located in the same place where it was before you started performing the actions. The result of inventory and copying will remain in the laboratory. If any materials are needed for copying, inventory, or research, they must at the same time be located within the laboratory. Otherwise, you will simply receive a message that you do not have enough materials to perform this kind of operation and you cannot start the process. The VRO or VRS itself may be located at a specified distance from the laboratory.

Mass Production increases the maximum number of simultaneously used production lines. Thus, if you study Mass Production, as well as Advanced Mass Production up to lvl 5, you will be able to simultaneously use 11 lines.

Supply Chain Management– the effect of this skill is similar to that of Scientific Networking. But it does not apply to laboratory slots, but to production lines.

EVE Industry - All you want to know
07/17/2014 18:24 By CCP Greyscale

Greetings, Space Track Rockefellers,

In this new blog, we'll be looking at everything related to the cost of researching and running projects in Krios, to clarify our "final decisions" on things that will change in the near future, and to collect everything in one place and create extensive documentation for the release (of course, in the patch notes everything will be laid out point by point and in great detail).

If anything related to startup or research costs is not mentioned here, it will not be included - even if it was mentioned in previous blogs or forum entries.

M.E. and T.E.

Main changes

• PE (Production Efficiency) is now called TE (Time Efficiency - Saving production time), since it is more obvious what exactly it is responsible for this parameter. ME (Material Efficiency - Saving materials in production) remains with the same name. In both cases, we will now display these parameters in the interface as negative numbers, since in fact this is a decrease in something. This became possible due to changes in inventory (modernization), which we will talk about below.
• The concept of “Waste” is becoming a thing of the past. All bonuses that affect materials simply reduce the amount of materials needed for production. The materials needed to produce T1 items have been increased by 1/0.9 to balance out the impact of this approach. We no longer have to keep a close eye on what materials can be made out of thin air due to high ME, as recycling built items now only returns 50% of materials.
• You can now research ME and TE in 10 steps. Each ME step reduces material requirements by 1% (always rounded up). Each TE step reduces construction time by 2%. These parameters are displayed as normal percentage values, so you can see the drawing with the parameters ME-3%, TE-12%.

Details

Two important notes: Firstly, we now round up materials for the entire project, and not for a single run as before. Thus, it will often be possible to achieve savings of less than 1 unit of materials over a long enough production cycle. Secondly, to prevent production inconsistencies, especially for T2 items (for example, building 10 Paladins from 9 Apocalypses), each run will require at least one unit of each material listed.
To maintain the non-linearity of research, each subsequent level will be researched longer than the previous one.

Here is the time needed to research T1 ammunition:

(If you look at the even levels, you will notice familiar values. This is done on purpose!)

To keep the drawings differentiated, we are introducing a ranking system. So, all the above values ​​are multiplied by the rank of the drawing. T1 ammunition has rank 1, jump freighters have rank 4000. To better understand what rank a particular item has, see Appendix 1.

In addition, the Material Efficiency skill has been renamed to Advanced Industry, and now reduces construction time by 1% per level. We're not entirely satisfied with this skill's devaluation, so we promise to reconsider it after Krios and explore ways to achieve our main goal with less drama.

Obviously, we need to ensure that the pre-Krios blueprints work after the Krios update, so we will have to change the current blueprints for the new system. The basic rule of this translation of drawings will be “not a single drawing should become worse functionally than it was before” - that is, after transferring the drawing to new rails, it should require the same, or even less, materials for production as before. Please note that by calculating the cost of the project as a whole rather than individual runs, long-term projects with many runs may have hidden material savings that were not previously possible.

Here is a diagram of the transition from old levels to new ones:

(To understand negative ME/TE, skip to the next section!)

Copying and inventory (modernization) / reverse engineering

The Game of Drones team will begin working on a clearer overhaul of modernization and reverse engineering as soon as the Krios update is released, so the changes in this blog will only help keep these elements of the game functional while they are worked on.

Main changes

• Copy time is now calculated per run and is always equal to 80% of the base construction time for a given blueprint (that is, it will become shorter for ships and longer for modules)
• Upgrades require only one run on a copy of the drawing and are deducted in the same way as if you were making from that copy.
• A successful upgrade always produces a blueprint with the maximum possible number of runs, which is then modified by decryptors.
• The maximum number of runs is set to 1 (one) for T2 ships and tuning modules (rigs), and for other T2 items - to 10 (ten).
• Successful modification without using decryptors now creates a blueprint with the parameters ME-2%/TE-4%. For balance, we are increasing the amount of materials needed to produce a T2 item by 50% due to negative ME. Thus, upgrading without using decryptors now requires 2% less materials than before.

Decryptors have been adapted to the new system, doubling TE bonuses to reflect the fact that TE savings can be achieved by up to 20%. This results in decryptors being left in limbo, which will be fixed in the aforementioned post-Krios upgrade/reverse engineering work.

To adapt the old blueprints, we will add 6 to the ME and TE for all t2 bpcs, and then convert them according to the blueprints above. Thus, a drawing without decryptors with ME-4 and PE-4 will first become a drawing with ME2 and PE2, and then will be converted into a drawing with ME-7%, TE-14%. This will happen only once due to the desire to make the script that changes the database simpler and more reliable. So enjoy the freebie while it lasts.

Pricing Basics

There are no more slots. There are no longer restrictions on the number of jobs you can run in a given plant. Now a factory is any place in a station or POS where you can launch any industrial project.

Instead, we will introduce a dynamic price change in order not just to “build everything in Zhit 4-4”, but to encourage construction in other places. This is due to the cost of hiring the necessary work force in this system.

The basic component of pricing is the system activity index. This parameter is calculated for each type of activity (production, copying, increasing production speed, increasing material efficiency of production, modernization and reverse engineering) for each system separately, so that in Zhit there will be 6 different indices for each type of project.

The index for a given activity-system pair is calculated as the sum of time spent on a given activity in a given system over the last 28 days, divided by the sum of time spent on a given activity in the entire universe over the last 28 days, and smoothed by taking the root of the quotient. This number is then expressed as a percentage, which will usually be a very small number, and can be anything from zero on one side to (theoretically) 100 on the other.

That is, if:

system_activity_job_hours take for total duration all work of this type in this system for the last 28 days, and

global_activity_job_hours take as the total duration of all work of this type in the entire universe for the last 28 days, and take

system_activity_index for the parameter we need, then the formula will be like this:

Once calculated, this index will be used together with the cost of the given project to calculate the base cost. Those who want to see how this is done in practice can refer to (in English).

The cost of a project is based on what will be obtained as a result of this project - a blueprint or an item. For manufacturing, the cost will be calculated as the sum of all components needed to build, so for most manufacturing projects the cost will be the sum of the cost of all components.

For copying and efficiency studies, it's quite simple: the cost of the project will be equal to 2% of the cost of the materials needed for the project requiring the given blueprint.

For modernization (inventory) and reverse engineering, the cost will be 2% of the average cost of materials for building items that can be obtained as a result of this project. Since you can get several different results for T2 and T3 ships, we take the average of all possible options.

We then multiply this value (that is, the cost of materials for construction or 2% of the cost of materials for research) by the activity index in this system to obtain the base cost of the project. Example: let's say the industrial activity index in Zhit is 5%. If you build an Apocalypse, the materials for its construction will cost 200kk, then the cost of construction will be 200kk*5%=10kk.

There is another catch for ME and TE research - high-level projects not only require more time, but also cost proportionately more. There is a multiplier for each research level that is equal to the time required to research to that level divided by the time required to research to the first level.

Cost Modifiers

There are a number of modifiers that affect the final price.

1. Reducing the price due to stations and improvements that are in the system. Stations, FV improvements and some Outpost improvements can reduce the cost. For each eligible project in a given system, multipliers for all stations and upgrades are applied to the base price. Full list multipliers can be found in Appendix 2.

Note: previously, improvements to outposts in nullsecs added production lines to the stations. They now provide an additional 1% material savings (that is, an additional level of ME-1%) for each upgrade installed.

2. Working groups will increase the cost when used. This increase will be indicated in the information about this working group and is a simple percentage share.

3. Factories can set fees (taxes) for the use of a given factory. For factories owned by NPCs, this is a simple multiplier of 1.1 to the project price or a tax of 10%. For activities carried out at player-owned outposts, this multiplier can be adjusted by the owner. For POS, taxes will not be set in the initial release, but in the near future we will consider introducing this feature based on player feedback.

All this is multiplied with each other and the base price to calculate the final unit cost of the run for a given project, which must be paid before work begins.

Drawing Options

We've made a fairly transparent new system of drawing parameters to bring them into a more consistent and interesting structure.

First, we assigned each drawing an invisible rank, which determines many parameters. The rank can be viewed in Appendix 1, but here are the rules that were used to determine the rank:

• Modules: rank set to 3/6/9/120, with a multiplier of 2.6 for T2 variants of T2; dimensionless modules are installed as S/M/L depending on the low/medium/high connector they occupy (low, medium and high power).
  • Some modules have had their rank tweaked to make them more interesting - mainly shreds, combat interaction modules, mining modules, and "specialized" modules that are supposed to be used on specific types of ships, such as doomsday guns, warp jammer probe launchers (announcers' traffic jams), etc. The T2 variants of these items also receive a 2.6 multiplier.
• Ships: a rank of 20/30/40/50/60 is set for frigates/destroyers/cruisers/battlecruisers/battleships, with cargo ships assigned to cruisers, and for T2 variants the rank receives another 20 multiplier. Capitals receive a rank of 200, except for supercars ( rank 400) and titans (rank 600).
• Charges: rank set to 1/2/3/4, multiplier for T2 options 1.6
• Drones: rank set to 1/2/3/40, multiplier for T2 options 5
• Modules for POS: set rank 20/30/40 for small/medium/large guns, 100/200/300 for control towers and 40/60/80 for other structures, based on CPU consumption (20 - less than 200, 60 - up to 750 and 80 above this value)
• Rigi: rank set to 5/10/15/20, multiplier for T2 options 10
• Everything else: a rank is assigned to each item separately.

Subject to some exceptions noted below, the combination of a drawing's rank, classification, and technical level will determine the drawing's parameters.

• Construction time is usually equal to rank times 300 seconds.
• T2 ammo is then further multiplied by 10 to maintain current batch sizes.
• T1 KBT are also multiplied by 25
• T2 CBT are multiplied by 4 (cannot be combined with the x25 multiplier above)
• The construction time of components did not change at all, since they were balanced relative to other production chains.
• Special edition ships (including all skins) receive a production time of 10 seconds.

Note: Special Edition ships also have a cost parameter set to ensure that these ships do not cost a single claim to build: The New Eden Painters Union is still negotiating with the Interstellar Industrial Workers Union.

Copy time, as stated earlier, will always be 80% of the base build time. Due to the interaction of different skills, both copying and production will have approximately the same throughput. We may revise this in the future to make copying more interesting.

Research times will always be equal to rank*105 for the first level, taking into account the scaling for other levels mentioned a little earlier.

Invent (upgrade) will be more difficult. We wanted to make sure that the base parameters were such that, given a 50% success rate, the upgrade time was approximately equal to the build time. Thus, a character with maximally pumped skills will be able to supply himself with enough t2 bpc to fill all his production slots. Yes, we are aware that the timing of modernization projects can cause problems. See previous note about inventory improvement work after we release Krios.

Thus, the basic time frame for modernization will be as follows:

• Time required to build item(s) from a blueprint with maximum number of runs
• Divided by 2 due to the assumption of a 50% probability of a positive outcome
• The time for making a T1 copy is subtracted from the amount received.

That is 2*(copy t1 + modernization) = construction time t2.

We then played with the numbers some more, multiplying the upgrade time for blueprints with a rank of 3 or less by 0.9, and for blueprints with a rank of more than 7 by 1.1. This will result in “larger” items being tied to the upgrade time, and “small” items to the production time. Obviously, various bonuses will spoil this balance - managing this is deliberately proposed as an exercise for players :)

The maximum number of runs has been adjusted for greater consistency, based on construction timing:

• Most T1 items receive approximately 2 days to produce
• Components receive approximately a week to produce
• T2 ships and rigs (tuning modules) receive 1 run
• The remaining t2 get 10 runs

We then round to the nearest 100 if the build time is greater than 1400, and to the nearest 10 otherwise.

Finally, the final cost is multiplied (as mentioned earlier) by 1/0.9 for T1 items and 1.5 for T2 items to adjust for the removal of the waste concept during production.

What we do NOT do

After much discussion, both internally and on the forums, we have decided that we will not be doing any additional compensation for drawings that have now been researched to ME and TE levels above 10. Various reasons led to this decision, including the creation of a serious precedent; the fact that no functional loss occurs; and the time that needs to be spent on creating a one-time compensation is better spent on polishing other features of the release that we bring to your attention. We understand that some people will not be very happy with this, and we have to emphasize that we have to evaluate everyone's interests equally. And in this case, we believe that the best solution for the game would be to simply convert the drawings using the new system, as mentioned above, but not take any other actions in this area.

We intended to introduce a bonus for several structures of the same type installed on this POS. In fact, this was implemented in its infancy, and due to the difficult need to make it both user-friendly and perform satisfactorily (updating every hour), and given the relatively limited benefits that such a solution provided, we decided not to do it , and concentrate on bringing the remaining features in the release to excellent condition.

Initially, a “wholesale discount” was planned, which would make long-term projects a little cheaper. After further reflection, we came to the conclusion that this should be abandoned due to extremely minor benefits even in the best case, due to the presence of non-obvious performance results (for example, TE research would reduce your discount), due to the difficulty in explaining given mechanics, and in the end it just added complexity that we didn't need or want.

In previous blog discussions we talked about regulating copy speed bonuses at Gallente Outposts. After carefully studying this scenario, it turned out that the problem essentially does not exist. All concerns arose when assessing the total number of works on T2 BPO, and the impact of the increase in the number of works on BPO on the inventory market, taking into account the significant cost savings when constructing on BPO compared to inventory. Currently you can get a build bonus of x0.4 at the Amarr Outpost, so changing the bonus to x0.4 to copy speed will not affect the potential throughput in any way, since the blueprint can only be used in one project at a time. Even if you copy on a Gallente outpost and then build on an Amarr outpost, you will still be limited by the copy speed. In practice, the ability to take advantage of copy speed without the need for scratch production could increase the popularity of this bonus. However, you will actually have to keep t2 bpo on the Gallente outpost, which has been improved specifically for copy speed, which is an extremely rare case.

And finally

Everything described above contains all the changes in two areas - blueprints and costs - that will be implemented in the Krios update, announced for release on July 22. Of course, we will monitor the feedback and respond in the discussion thread of this blog on the offforum, in other topics dedicated to errors and feedback on the Krios update, as well as discussion of industrial development on Tranquility in the months following the release.

If you have questions, comments, etc. — please share your feedback with us.

That's all for today -
Greyscale, on behalf of Super teams Friends and Game of Drones teams

Appendix 1: Ranks

Appendix 2: Station Cost Modifiers

All this is presented to your attention to the music of Hell is for Heroes, which played without interruption

Most items in EVE universe created by players, so production in the game matters a lot. There are many things that go into manufacturing, from researching in a laboratory and producing your product to selling it. Let's start with the basics: the skills a production character requires to be effective.

Skills

The most basic skill a production character should have is Production Efficiency. After you buy this skill, train it to level 5. Production Efficiency is a one-of-a-kind skill that everyone must have in order to be efficient and competitive in the production of goods and, unlike many other skills, the rewards from reaching level 5 are well worth it. The easiest way to explain why this is so is with an example.

Let's say that you and your competitor have the same projects that are equally well researched (I'll go into "research" in a bit). Your production efficiency is at level 5, but he doesn’t have it. Next, suppose that the project says that 1000 units of material are required for production. You will produce items using as much material as specified in the project, that is, 1000. Your competitor on the other hand will need 1250 units of material (later I will explain what this is all about). This may not seem like a big number, but let's take it a step further down the road and see what happens when you start selling items.

You look at your product and think that the selling price of this product should be 50% more than the cost, which will bring good income. You set the price at 1500 and start selling it. Your poorly trained competitor is faced with a dilemma. He can also set a price 50% higher than cost, but this will mean that the price of his product will be equal to 1875. Perhaps he will be lucky and sell this product. But on the other hand, most likely not. He will have to lower his price to compete with your price. To become competitive, he needs his product to cost 1500. This means that his profit from the sale will be a paltry 20% of production costs, which is not even close to the benefit you get.

Other skills are of course also important. After Production Efficiency, Mass Production comes in importance. It allows you to manage multiple plants. Simply put, it will allow you to produce more product. Industry is certainly good, but greater productivity is easier to achieve through mass production. Industry level 5 will increase your productivity by 33%. Mass production level 3 will increase your productivity by 300%, plus it will allow you to have factories in different locations. Give mass production a higher priority in training than Industry, even if it has a second rank, it is still more profitable to train than Industry, despite the time costs.

Then there are Science skills. They are much less important than Production skills. Why? Anyone with Science level 1 can run a laboratory. At 20,000 ISK, Science is a very inexpensive skill and players just need access to projects to research. Use your labs to your advantage. Everyone in your corporation you trust should have the Science skill and be researching something - lab rent is the only real cost. The Science skills (science, metallurgy, and research) merely reduce the time spent on research. While this is useful if you need to do a lot of research or need to research something quickly, the reality is that it is much more profitable to pay 20k while having another player doing research as well. Although if you have a character with strong Science skills, make sure he/she also has Lab Operations. After that, if you are given a bonus, use it as much as possible. Control of Lab Operations is very important for both small corporations and private individuals - it increases the efficiency of a limited number of players.

Selecting your first project

Once you have mastered the skills required to make things, you need to make choices and decide what you will make. Basically, making things has two purposes:

Making things for personal use (by yourself or a corporation)
Making things to sell
If you decide to make things for yourself or your corporation, then you need to focus on those things that you know you will make quite often. Ammunition fits perfectly into this category. It's also worth purchasing some equipment and perhaps ships - if you use a lot of different equipment. As for corporations, it is worth introducing into the project things that participants use constantly.

Keep in mind that many players are into crafting and you must make the right choices to make a profit.

When it comes to selling, the abundance of information available in the market will help you make an informed decision. Hiding on the trading screen provides information about the price history of everything that can be bought in the market. If you open the market and select a specific item, you will see a map of the area on the supply and demand screen. Players often use the market for these purposes. However, there is also much more information here for the resourceful player planning to build his own trading empire.

In particular, this applies to the history icon. By clicking on it, you can see how well a given item sold over a certain period of time. By customizing the combo box on the left side, you can see how well an item sold in a specific location or an entire region. You'll also see how many items are sold each day, as well as the prices - high, low and average. Although the data may seem dry, this is invaluable information that will help you decide what exactly you will sell.

Projects (Blueprints)

Projects are the basis for making things, so we'll take a closer look at the information they contain. Once a project is in the cargo bay, you can get detailed information about it by right-clicking. Here is a screenshot of the Antimatter hybrid charge project. One thing to note is that project statistics do not take into account the skills you have or don't have. But the research carried out is taken into account.

Manufacturing Time (Production Cycle): The time in seconds required to produce one batch.

Mineral Level (Mineral Level or ME): The mineral level shows how many times the project (blue print) has been tested for minerals.

Wastage Factor (Loss Factor): This metric is inaccurate in many ways. There are actually two types of waste associated with making things. The first type of loss can be called losses due to incompetence. It depends on the level of the Production Efficiency skill. This value is related to another, which can be called production losses. They depend on the project's mineral efficiency level and require an additional amount of each type of mineral to the overall "mineral" cost of producing the item for the project. For everything except drones, the overall loss factor is calculated using the following formula:

(1 / (1 + ME))

Where ME is the level of mineral efficiency of the project. For drones the following formula is used:

(0.05 / (1 + ME))

Research Mineral Time (Research time for minerals): This is the time in seconds that a player with zero Metallurgy level needs to increase the level of the project's minerals by 1. Typically, for ammunition and drones it is 2400, for equipment - 12000, for frigates - 120000, 240000 - for industrials and cruisers, 360,000 for battleships.

Research Copy Time (Research Time): This is the time in seconds that it takes for a zero Science level player to create a copy of the project with half the production cycles “crammed” into the original project. Typically, for ammunition and drones it is 2400, for equipment - 12000, for frigates - 120000, 240000 for industrials and cruisers, and 360000 for battleships.

Produces: This is the name of the thing that will end up if you take the design to the factory and are able to produce the thing.

Copy (Copy): Indicates whether the project is a copy or original. Thanks to this, you can distinguish copies from originals. When purchasing a project (blue print) from someone, be sure to check it in the info. This way you will know for sure that it is not a copy.

Research Productivity time (productivity research time): This is the time in seconds that a player with zero Research level needs to increase the Productivity level of the project by 1. Typically, for ammunition and drones this is 2400, for equipment - 1200, for frigates - 2400 , 120,000 - for industrials and cruisers, as well as 240,000 for battleships.

Productivity level ( Productivity Level ): The productivity level shows how many times the project has been subjected to productivity studies.

Licensed Production Runs Remaining(Remaining cycles of licensed products): When copying a project, you need to consider how many production cycles it will have this project. The more cycles you specify, the longer it takes to manufacture. Each cycle allows the factory to produce one batch of goods. Typically, the maximum number of cycles for ammunition and drones is 1500, ammunition - 300, frigates - 30, industrials and cruisers - 15, battleships - 10. You may have noticed that some projects have this value set to unlimited (as a result of a previously issued patch, who gave this opportunity). This means the following: you can use the copied project an unlimited number of times without any problems.

Production Batch Size (Item Batch Size): This is the number of items you will receive in one production cycle at the factory. For ammunition, this quantity is 100 copies. For rockets and light missiles - 10. In all other cases, you get 1 item in each batch.

Required Ingredient - Required Components (Batch): Shows how many units of certain materials you need in order to make one batch. You will have one entry for each type of mineral needed to craft an item. This metric takes into account production losses resulting from low ME, but does not account for incompetence resulting from low Production Efficiency skill level.

Wasted Ingredient (Per Batch) - Spoiled Material (for a batch): This is a certain number of units of each type of minerals that you additionally need for production losses. You will have one entry for each type of mineral needed to craft an item. Ideally, this amount is less than 1 for each mineral. This number is derived from the base amount of minerals (not shown in the project).

The base amount of each mineral required to make something is a valuable statistic, although not specified in the design. We call this the basic mineral requirement. This can be calculated by taking the required materials and subtracting the number of spoiled minerals for each mineral (tip: if you haven't started researching mineral levels yet, keep in mind that for most things the base mineral requirement is equal to the number of spoiled minerals times the number of spoiled minerals by ten, and for drones - by twenty). The basic mineral requirements are the starting point from which all other crafting data is calculated. It’s worth starting with them to determine how much you will get after recycling the item.

Factory work foreman ( The Factory Wizard)

When you start working with the factory master using the install button, the first step is to select a hangar for production. This hangar contains the project you want to put into production, and can be your personal hangar or owned by a corporation.

Click on the double arrows to select a hangar from the list that appears. The hangar with the required project must be within sight. Once you select a hangar, you will see a list of all available projects in the hangar. Click on the project you want to run, select it and then click on the next button.

If you selected a project from your corporation's hangar, you will be asked to select a hangar in which you will need to place the materials. Click on the double arrows and select the hangar from the list that appears. Keep in mind that you must have access to use the items in this hangar. Having selected the hangar, press the next key.

Now, you will be asked to select the hangar from which you want to receive finished products. It is in this hangar that the finished product will appear (indicated in the project in the “Produces” column). You must have open access to this hangar. So, select the hangar using the context menu and press the next key.

Now you will need to indicate how many batches of the product you want to receive. At this stage, it is important to understand the difference between batches and the number of items you receive in the end. A batch is one cycle of a project. This number may not coincide with the number of items in the end. Some projects produce more than one item per cycle (for example, ammunition). The project item "Production Batch Size" will indicate how many items you will receive in one batch. For example, the batch size of Phased Plasma M products is 100. So if I want 2000 of this ammo, I need to make 20 batches. You can set the number of parts you want using the keyboard or the + and - keys on the right side. Having specified the required number of batches, click on the next button.

The last window will show the summary of your actions. This is the last window and production will start as soon as you press ok, so make sure everything is correct. The production work will begin as soon as you click ok and the factory wizard closes.

When working with a factory, you need to consider the amount of minerals consumed and the time it takes to make a batch. First, we will show simple formulas using data already obtained in the project. Next, we'll demonstrate complete formulas that take into account the research for the project (and allow you to check various data if necessary).

The amount of consumable materials for each batch is equal to:

(1.25 - 0.05 * Production Efficiency Skill level) required materials

Time to complete each batch:

Production cycle * (1 - 0.05 *Industry Skill level)

Complete formulas taking into account all factors:

(1.25 - 0.05 * Production Efficiency skill level) * (1 + (main loss factor / (1 + Mineral Efficiency project level)) * basic mineral requirements

(Base Production Time - (5 / (1 + Productivity Level))) * (1 - 0.05 * Industry Skill Level)

Laboratory Operations

The activities involved in managing a laboratory are similar to those used in operating a factory. However, the individual steps are quite different and deserve a detailed look. The best place to start is the Research Facility window. The screen below is an example of what you might see when you open the research facility window at the station. Please note that in these examples you will be seeing the actions of a member of a corporation. If you are doing research in a laboratory that you rented for yourself, then the procedure is almost identical, except that you do not need to decide which hangar to place materials in and which one to take items from.

On the right side of the window there is a list of all the station's laboratories. There are currently 36 laboratories available at the station. Each of the laboratories has one of the following statuses: Publicly Available, Rented, Rented to your corporation, or Rented to you. Public laboratories are just that, that is, they can be rented by any player. Slots number 22–26 have this status. Slots number 14,16 and 21 are rented and are temporarily unavailable for use. They were rented by another player or corporation. You cannot see which player or corporation rented the hangar, you just see its status. The status of the slots you rent will be as follows: Rented to Character Name, where character name is the name of your character. In our example, slot number 17 is listed as "Rented to Dawnstar", which is our character. Thus, the slot is available for our personal use. Lastly, slots can also be rented by your corporation. In this case, the status of the slots will be Rented to Corporation Name, where Corporation Name is the name of your corporation. The screen shows that slots number 15, 18, 19, 20 and 22 are Rented to Kiroshi Group (this is the name of the corporation we belong to). You may also notice indications that some slots are already in use by your corporation. For example, slot 18 is leased by Kiroshi Group and is temporarily used by the Omen project.

Also, in addition to the list of labs on the right side, there is a large panel on the left and buttons at the top (as well as a close key to close the window). The panel is a list of general information about the various slots, including those that you see and can use. The keys at the top take effect when you select a specific slot.

First, click on the slot. This way you will highlight it. Once you have done this, there are three keys you can use (depending on the activity in the selected slot at the moment).

The "Rent Slot" button is only used if you have selected a Publicly Available lab slot. This allows you to rent a slot in your character's or corporation's name. The first thing you will see when renting a slot is a dialog box asking if you want to rent this slot for the needs of your corporation. This question will only appear if you have factory manager rights and your corporation has an office at the station. If you decide to rent a slot for a corporation, then it will be available to each member of the corporation, but otherwise only for your personal use. However, you will also see another dialog box with information about the rental price. We recommend agreeing to the rental amount, otherwise you will not be able to use the laboratory.

The "Cancel Rent" key only works if you have selected a rented slot. Pressing will cancel the laboratory rental.

The last "Install" button only works if you have selected a laboratory slot rented by you or your corporation. This function is the main one for the Research Facility window, since it is the one that initiates the laboratory master for a slot rented by you or a corporation. One thing to note about the Lab Wizard is that the dialog box is modal, so you won't be able to switch focus to other windows (like in one of the chat channels). All Lab Wizard screens have four keys: Back, OK, Cancel, and Next. Back will take you back to the previous step in the wizard (unless you're on the first step, in which case nothing will happen). The OK key is used to confirm in the final; it has no effect at other stages. The Cancel key works at any step and will interrupt the Lab Wizard by closing its window. Finally, the Next key takes you to the next step of the wizard (unless you're at the last step, in which case it has no function).

The Install key transforms into the Uninstall key if work on the slot has already been started by you or another member of your corporation. If you click on the Uninstall button, this will remove the project from the factory back to the hangar.

Laboratory Master ( The Lab Wizard)

The Lab Wizard includes several steps that you must follow to get started in the lab. The first step is to decide what type of work you will do there. You will see the Manufacture combo box and double arrows on the right. By clicking on the double arrow, you will open a list of all possible actions. These actions are: Manufacture, Copy, Research mineral efficiency, Research productivity time, Duplicate item, Reverse engineer. Currently available are Copy, Research mineral efficiency and Research productivity time. Other actions will allow you to pass the wizard, but at the end you will receive a failure message.

Mineral Efficiency Study ( Research mineral efficiency

By researching mineral efficiency, you reduce production losses in a project. You can see this value in your project in the Loss Factor and Damaged Material items.

For everything except drones, the loss factor is calculated using the following formula:

(0.1 / (1 + ME))

In which ME is the level of mineral efficiency in the project. For drones the following formula is used:

(0.05 / (1 + ME))

In our project, Merlin uses the previous formula or (0.1 / (1 + 5)) , which is roughly equivalent to .0167.

The time you need to complete one ME level is equal to the Miner Level Research Time (specified in the project) * (1 - 0.05 * Metallurgy skill level). Here we can give a little hint. If your project has not yet been researched, then the number of mineral levels to eliminate all design flaws is equal to the highest indicator in the Spoiled Material column (in the project), rounded down (this can also be calculated by multiplying the loss factor -0.1 or 0.05 by the highest high rate basic requirements for minerals).

Productivity Research

The second activity available to you is Productivity Research. Additional levels of Productivity will reduce the production time for your project. We recommend using this study for ammunition, and in case you have extra lab time and don't know how best to use it. Thus, the manufacturing time will be reduced by five seconds. This time is significant in the production of ammunition, but in the production large ships this time is insignificant.

The productivity level reduces production time by 5/(1 + PL), where PL is the project's productivity level. The amount of time to conduct one productivity research is equal to Research productivity time * (1 - 0.05 * Research Skill Level).

Copy

By copying you create a duplicate of the selected project. Research mineral efficiency will increase the mineral efficiency level of the project. Research productivity time will increase the productivity level of the project. Having selected the action you want to perform, click the Next button to proceed to the next step of the wizard.

The copy is similar to the original in every way, but with the following restrictions: You may not continue further research with the copy. It is only good for a limited number of production runs (excluding patched copies)

The time it takes to copy a project may vary, depending on the established number of release cycles for licensed products. The copy time specified in the project is the time required to make a copy of the project for half the maximum number of cycles. Thus, it is calculated by the formula: project copying time * 2 * number of licensed product release cycles * (1 - 0.05 * Science skill level) / maximum number of licensed product release cycles.

At this stage, you will need to select an item for installation. First, click on the double arrow to select the hangar in which you want to work on the project. In our case, we go down the list to select the Production hangar in which we store projects. Once you have selected a hangar, the project will be displayed on the screen (see screen below). At this stage, it is important that the hangar with the desired project is in sight. Select the project you want to install (it will be highlighted) and then click on the Next button.

The next window will ask you to select a source hangar. At the moment, it doesn’t matter which hangar you choose, since the currently working options do not require any resources. So, leave the cursor where it is currently located and click on the Next button.

The following window will only appear if you are making one or more copies of your original project. There will be a question about how many production cycles the copies should be designed for. You can specify from 1 to the maximum number of cycles. The maximum number of cycles will be specified in the wizard (and will be specified in the default text box). Usually, players indicate a maximum of cycles. Note: The number of cycles indicated affects the copy production speed. Making a copy that lasts half the maximum number of cycles will take the same amount of time as the copying time specified in the project. Making a copy with the maximum number of cycles will take twice the time it takes to copy the project. Accordingly, smaller quantities will take less time. After specifying the number of cycles, click Next.

The final step is confirmation of all specified data. You will see a general summary. If you are sure that everything is correct, press the OK key to complete the selection (then work in the factory begins). If the selection was made incorrectly, click Cancel and start the selection from the beginning, or use the Back key and make the necessary corrections. The Next key does not work at this step.

What in other online projects is called the word “craft” in world of EVE Online is called manufacturing. However, these terms are similar only in their basis and name. Almost all items used in EVE Online were produced by other pilots - from the simplest ship guns and ammunition for them, to huge ships and stations in the depths of space. Constant conflicts and wars in the world of New Eden provide an ongoing demand for equipment, new ships, weapons, and even more so for consumables.

11 years of quality development have turned EVE into a world-class game with a unique setting. Try playing EVE Online and judge this digital masterpiece for yourself.

What does a player need to produce?

In the simplest cases, for production the player will need several basic skills, blueprints and minerals - and you can start creating your own industrial empire in EVE Online.

The necessary minerals can be bought on the market or mined independently in the asteroid belts. Basic blueprints for simple and low-tech items can also be purchased from the market at a very low cost. However, a smart player with a good trading spirit can turn even these drawings into a source of large income.

What can you produce in EVE Online?

In EVE Online it is possible to produce almost any item that exists in the game. Almost all modules and ships that are on the gaming market were built by the players themselves.

Because in EVE Online, like nowhere else, it is implemented principle of proportionality of reward and risk, many pilots prefer to fly on cheap ships. Thanks to this state of affairs, in EVE there is always a need for the existence of production at all levels - from the simplest things accessible to a beginner, to very complex ones, requiring more than one month of both preparation and production itself.

An enterprising player in EVE Online can build absolutely anything - from a simple frigate to a huge titan.

How does a player understand what needs to be produced?

If you want to produce for profit, then you will need to carefully monitor the market and contracts in EVE Online. The system allows you to keep track of what equipment and ships can be sold with a high profit, as well as look for places where it is best to do this.

A player with a business sense will be able to find a huge number of opportunities to make a profit from his production activities in EVE Online. A pilot providing his alliance or corporation with resources and goods must always understand what exactly they need at the moment and try to find an opportunity to provide everything that is needed.