The MSK plant has been manufacturing metal structures of any complexity in Moscow and Moscow Region for many years. During this time, we have gained extensive experience in the production of standard beams, trusses, purlins, columns and other structural metal structures. We also produce tanks, supports, towers, billboards, other metal structures. We design and manufacture unique products to order, calculate loads, and select the optimal rolled metal.

Our company provides comprehensive services. We carry out all types of metalworking, apply protective and/or decorative coatings. We deliver to facilities in Moscow and the Moscow region, assemble and install MK. We carry out strict quality control at all stages of production and provide a guarantee for all types of work.

Cooperating with us is convenient and profitable. We develop drawings based on drawings, sketches and photographs. We draw up estimates, prepare packages of documents, and help with obtaining construction permits. We provide our own transport and special equipment, and have qualified installers on staff. We set prices flexibly and always meet deadlines.

Cost of manufacturing metal structures to order

* prices do not include the cost of rolled metal.

MAIN ADVANTAGES AND DISADVANTAGES OF METAL STRUCTURES

The main advantages of metal structures include:

• Their high load-bearing capacity. Metal structures can absorb significant forces with relatively large cross-sections due to the high strength of the metal.
• Metal structures are highly reliable, since, unlike wooden or reinforced concrete structures, they are homogeneous in their structure, and therefore it is much easier to calculate their strength. Which ultimately allows you to design a more durable and reliable structure.
• Transportability. Unlike structures made of reinforced concrete or stone, metal structures are subject to transportation.
• Ease. The high mechanical properties of the metal allow them to tolerate high stresses. With the same forces, the sections of metal structures are lighter compared to the sections of structures made of other materials. So for aluminum alloys the ratio specific gravity to the design resistance is 1.1*10⁻⁴ 1/m, and for concrete c=24*10⁻⁴.
• Impenetrability. Since metal, due to its physical properties, does not allow air or gas to pass through, this allows it to be used for the manufacture of water- and gas-tight structures for various types of industry.
• Industrialism. Metal structures are manufactured industrially, which ensures high accuracy and speed of production.
• Ease of installation and operation. Unlike reinforced concrete structures, installing metal structures is easier and faster. In addition, if necessary, they can be strengthened and, in case of minor damage, repaired.
• Environmental friendliness. Metal structures meet all necessary environmental requirements, since after dismantling they can be recycled.

There are only two disadvantages:

• Susceptibility of metal structures to corrosion. To combat corrosion, you can use various coatings: varnishes and paints, epoxy resins, galvanized. In hydraulic engineering, cathodic protection is successfully used. But in any case, this entails additional costs.
• Low fire resistance. When steel structures are heated above 400°C, and aluminum structures above 200°C, materials begin to creep and they completely or partially lose their load-bearing capacity. Therefore, it is necessary to carry out fire retardant treatment of metal structures.

APPLICATION OF METAL STRUCTURES IN MODERN CONSTRUCTION

The widespread use of metal structures has long become a trend for modern construction. various types and purpose. There are practically no modern buildings and structures that do not include any structural elements made of metal. Metal structures are used in both load-bearing and enclosing structures. In 2012, about 70 million tons of steel were produced in Russia, and more than 5% was used for the production of metal structures.

In construction, as a rule, structures made of ordinary carbon steel, aluminum alloys, and low-alloy high-strength steels are used. The most widely used metal structures are:

• Construction of industrial buildings, hangars and public buildings(exhibition pavilions, sports and shopping centers, indoor markets, etc.) Since modern industrial buildings often have large spans, heights and are complex engineering structures, more than half of the building metal structures are spent on load-bearing frame elements (crane beams, columns, trusses, etc.).
• Production of sheet structures: tanks, gas tanks, bunkers, pipelines, etc. The use of metal in such structures is due to the requirement of complete sealing.
• Special structures for civil and industrial purposes: construction of railway and road bridges, overpasses and overpasses. Metal structures are also used in housing construction and for tower and mast-type structures (towers, masts, chimneys, power line supports, drilling and oil rigs, etc.).
• They are made from aluminum alloys, characterized by increased anti-corrosion resistance and lightness of their own weight. roofing and facade coverings of buildings (for example, systemsKalzip).

ISKON LLC (Ivanovo Steel Structures Plant) offers manufacturing and installation of metal structures at competitive prices to entrepreneurs, construction organizations and general contractors. The tables below indicate the cost per 1 ton of products for the design, production, and assembly of metal structures, as well as a separate price list for prefabricated buildings for various purposes.

What is the cost of producing metal structures?

When choosing a contractor, you should not focus solely on the cost of metal structures per ton; the pricing system in this market is approximately the same for all manufacturers. Let us give an example showing how unjustified savings affect the quality of products.

The approximate price of metal structures for 1 ton is about 80,000 rubles, this amount includes the following costs.

1. Cost of rolled metal- 54,000 rubles (67%). It is the same for almost everyone; it is dictated by large metallurgical plants: EVRAZ, NLMK and others. You can save on this only with a very large order (over 1 thousand tons), and this costs a lot of effort.
2. Anti-corrosion materials- 4,000 (5%). Their cost is also difficult to reduce. Manufacturers who purchase cheap materials risk product quality and reputation. For the customer, this means costs for unscheduled repairs.
3. Cost of work on the production of metal structures- 20,000 (25%). The redistribution of rolled metal includes production costs, Consumables, workers' salaries, equipment depreciation. In practice, you can find offers from 15 to 30 thousand rubles. In the first case, problems with quality are inevitable, the second significantly exceeds the average market threshold.

The remaining 2,000 rubles (3%) - delivery of metal structures to the site. It can increase at a great distance from the place of production. You need to understand that professional packaging and transportation of structures using special transport is a guarantee of the safety of all elements and trouble-free installation of the frame on site.

Prices for the production of metal structures

In the manufacture of metal structures, the price per ton consists of many indicators: metal preparation, cutting, assembling semi-finished products, drilling holes, welding, cleaning, finishing parts and coating with an anti-corrosion compound. We carefully control our costs, trying to reduce the labor intensity of manufacturing structural elements. This allows us to offer the customer quality products at an average market price.

Prices for installation of metal structures

When installing metal structures, the price per ton depends on the height of the building, technological features assembly and includes, in addition to direct installation work, the costs of operating machines and mechanisms. The calculation for the installation of enclosing structures (sandwich panels, profiled sheets) is determined per square meter. meter, and the cost of arranging floors per 1 cubic meter. meter. The price list for metal structures contains approximate prices; when placing an order, an updated calculation is made.

Prices for designing metal structures

When designing a facility, the optimal cost of metal structures is determined based on technical and economic indicators that characterize the quality of the design solution and its manufacturability in terms of the upcoming costs of constructing the building.

The price of metal structures per ton takes into account:

• required amount of metal, coatings;
• the complexity of manufacturing the structure;
• technological production cost;
• packaging, loading and delivery costs;
• cost of installation of structures.

The project must include estimate documentation. ISKON LLC designers are always looking for a solution that allows them to achieve results with minimal metal consumption and labor-intensive operations, taking into account the necessary requirements for the reliability and safety of the construction site.

Prices for prefabricated buildings

When constructing prefabricated buildings, the cost of manufacturing metal structures (price per ton) makes a major contribution to the total costs of constructing the facility. Standard projects are more economical due to proven technology, non-standard buildings and structures require more labor, and accordingly, the cost of work will be higher.

ISKON LLC provides a full range of services for the design, manufacture, and installation of metal structures, so the average price per ton in our company is cheaper for the customer. In addition, execution of the order by one contractor significantly speeds up the construction process, simplifies interaction and guarantees quality at every stage of the work.

Terms of payment

Payment options only cashless payment to account legal entity or IP.

The contract for the production of metal structures can be downloaded.

For construction companies discounts all summer!!!

• LSTK profiles with holes from PS 100 to PS 400 with a thickness from 1.5mm to 4mm: 62,000 rubles/t

The construction of buildings based on metal frames cannot be called a fundamentally new direction, because people have been building houses this way for decades. However, the production of light steel thin-walled structures has brought low-rise construction to new level. The production and installation of such buildings is carried out in a matter of days, and they pay for themselves many times faster than traditional buildings.

Today, metal structures are called inexpensive and lightweight buildings erected using frame technology. The main thing in such a building is a reliable and durable frame, which, after manufacturing and installation, is sheathed with insulating and finishing materials. As a result, construction resembles a construction set, and installation is carried out according to special scheme. What material to cover the walls and ceilings with, as well as what to make the roof from, depends on the purpose of the building and the region of operation.

Distinctive features of buildings based on light metal frames

Objects built on the basis of a metal frame in Moscow would not have become so popular if they did not have a number of key advantages. Among the most important advantages, the following should be noted:

• very low weight of the structure, and as a result – low pressure on the ground. This allows the use of metal structures in those regions where capital construction is impossible due to soft and unstable soils;
• no need for a massive and expensive foundation. The light weight of the structure allows you to make do with the simplest and most inexpensive foundation options - shallow strip and pile-screw;
• amazing speed of material production and construction. No object made of stone, concrete or wood can be assembled in one week. Buildings made of lightweight metal structures, especially small ones, can be assembled by a team of 3-4 people in just a few days;
• the use of metal structures makes it possible to achieve the ideal geometry of the structure. Using this method, it is much more difficult to make mistakes in measurements and calculations, since all this has already been taken into account, and all parts are strictly adjusted to each other at the factory during manufacturing;
• the use of metal structures is the most economical type of construction. Lack of an expensive foundation, large quantity work force for installation and special equipment allows significant savings without compromising the quality of the structure.

For what objects in Moscow can metal structures be used?

Even though there are many cases where a metal frame is not suitable for construction, the scope of application of metal structures is very wide. Here are just a few types of objects for which this type of construction is ideal:

• warehouses and hangars;
• industrial buildings, workshops, utility rooms;
• residential low-rise frame houses, cottages, dachas;
• covered garages, parking lots, boxes, pavilions;
• small architectural forms;
• public buildings.

Approximate frame prices in Moscow for prefabricated hangars

How are buildings made from metal structures manufactured and installed in Moscow?

Our plant offers the manufacture and installation of metal structures of various types and purposes in Moscow. The quality of the products meets all necessary standards and can be used for construction in any region of the country. Production is carried out on the most modern expensive equipment, finished products goes through several stages of quality control.

What needs to be done to order the production of metal structures from us? Any order for the production and installation of metal structures through the efforts of our plant begins with a telephone call to our consultants, a written request or a personal visit to our office. You will be offered a large catalog containing a large number of already ready standard projects buildings made of metal structures.

If none of the ready-made solutions are suitable, we are ready to develop a project for you from scratch, taking into account all your requirements and wishes. Sometimes this is necessary if you are running an unusual business or simply want your building to be visually different from nearby objects.

After this, the stage of agreeing on all the necessary details begins. Our specialists calculate the cost of work and the amount of material required. We carry out all tasks related to the design, production and installation of buildings ourselves, without the involvement of intermediaries. This directly affects the cost, making cooperation with us the most profitable financially.

After all calculations are completed, our plant begins production of metal structures. At this stage, we manufacture all the necessary elements for the future frame of the building. Each product has a special marking, which is necessary to avoid errors during the installation process.

The next step is to send all manufactured materials to construction site customer. If this is provided for in the contract, then the next stage of our work will be the installation of the foundation. The work is being carried out in parallel with the production of metal frame parts. Due to the insignificant weight of the future structure, you can limit yourself to a pile foundation or strip foundation.

Following the foundation comes the installation of the structure. Our specialists will comply with all norms and requirements for frame buildings. For connection, only those methods indicated in the wiring diagram are used. If it suddenly turns out that some fastening is missing, we will make it in as soon as possible, and not replaced alternative way connection of frame parts. Any deviation from the design scheme is considered a violation, which is unacceptable in our work.

What can simplify the production and installation of metal structures?

Extensive work experience is the secret of a successful approach to each client. We effectively use the knowledge and experience of our specialists when organizing the construction process. Our tasks include not only developing a project, manufacturing and installing a metal frame, but also taking into account supply logistics, competent use of technology, as well as monitoring construction estimates in order to avoid its increase during the course of work.

• [email protected]
• [email protected]

• home
• About company
• Products
• Services
• Projects
• Certificates
• Contacts

Products

Manufacturing of metal structures according to drawings

Metal Engineering LLC has the necessary resources to produce metal structures for a wide range of applications. Our company is one of the leading metal working services on the market. Over 20 summer job The company has established itself as a reliable and conscientious contractor. We also manufacture metal structures according to drawings in Moscow.

Metal structures are a modern building material, characterized by efficiency, durability and affordability. It is currently popular in various fields activities. And the range of its use is constantly increasing. The Metal Engineering company manufactures metal structures according to customer drawings using high-quality products.

Scope of application of metal structures

Metal structures are used in the construction of many types of buildings - industrial, civil and commercial. Due to their special reliability and universal nature, such products are consistently in demand from government organizations, legal entities and individuals.

Most often, our metal structures serve as a frame for the construction of various objects. Metal structures are also successfully used in the construction of flights of stairs, floors between floors, connecting fragments, hangars, and columns. We produce and install metal structures of various configurations (bolted, welded), including according to individual parameters.

Thanks to a developed technological base and constant improvement of technical skills, our company offers the most affordable cost for the production of metal structures according to customer drawings. At the same time, we guarantee high quality and reliability of manufactured products. All work procedures are carried out by professional craftsmen with extensive experience in the field of metalworking.

All manufactured and sold products are manufactured in full compliance with current construction technical and sanitary standards (SNiPs, GOSTs, etc.).

To place an order for the production of metal structures according to your drawings, contact us by phone or send a request from the website. We will advise you on any questions you may have and place your order. If you send your application by mail, our specialists will contact you within a day.